NOTE: this post has been replaced by a newer version.
Please meet x8dtu, a server destined to be the future home of FreshPorts. There is nothing installed here.
In short:
- FreeBSD 11 booting off a mirrored pair of zfsroot SSDs
- 4.5TB of mirrored ZFS
- 196612 MB of RAM (yeah, that’s 196GB of RAM)
- Supermicro X8TDU motherboard
- Intel Xeon E5620 @ 2.40GHz (two of those, giving 16 CPUs)
root@x8dtu:~ # gpart show
=> 6 1220942635 ada0 GPT (4.5T)
6 128 1 freebsd-boot (512K)
134 4194304 2 freebsd-swap (16G)
4194438 1216748203 3 freebsd-zfs (4.5T)
=> 6 1220942635 ada1 GPT (4.5T)
6 128 1 freebsd-boot (512K)
134 4194304 2 freebsd-swap (16G)
4194438 1216748203 3 freebsd-zfs (4.5T)
=> 40 234441568 ada2 GPT (112G)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-zfs (8.0G)
16778280 217663328 - free - (104G)
=> 40 234441568 ada3 GPT (112G)
40 1024 1 freebsd-boot (512K)
1064 16777216 2 freebsd-zfs (8.0G)
16778280 217663328 - free - (104G)
root@x8dtu:~ # zpool list NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT tank_data 4.53T 312K 4.53T - 0% 0% 1.00x ONLINE - zroot 7.94G 592M 7.36G - 5% 7% 1.00x ONLINE - root@x8dtu:~ # zpool status pool: tank_data state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM tank_data ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 ada0p3 ONLINE 0 0 0 ada1p3 ONLINE 0 0 0 errors: No known data errors pool: zroot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 ada2p2 ONLINE 0 0 0 ada3p2 ONLINE 0 0 0 errors: No known data errors root@x8dtu:~ #
$ cat /var/run/dmesg.boot
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2400.14-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ee3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 206162624512 (196612 MB)
avail memory = 200357441536 (191075 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <080312 APIC1521>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20160527/tbfadt-650)
ioapic0: Changing APIC ID to 6
ioapic1: Changing APIC ID to 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xec00-0xec1f mem 0xfbde0000-0xfbdfffff,0xfbdc0000-0xfbddffff,0xfbdbc000-0xfbdbffff irq 28 at device 0.0 numa-domain 0 on pci1
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 00:25:90:92:2d:b8
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe880-0xe89f mem 0xfbd80000-0xfbd9ffff,0xfbd60000-0xfbd7ffff,0xfbd5c000-0xfbd5ffff irq 40 at device 0.1 numa-domain 0 on pci1
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 00:25:90:92:2d:b9
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 12
igb1: Bound queue 5 to cpu 13
igb1: Bound queue 6 to cpu 14
igb1: Bound queue 7 to cpu 15
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib2: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 9.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xdc00-0xdc1f irq 16 at device 26.0 numa-domain 0 on pci0
uhci0: LegSup = 0x2f00
usbus0 numa-domain 0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xd880-0xd89f irq 21 at device 26.1 numa-domain 0 on pci0
uhci1: LegSup = 0x2f00
usbus1 numa-domain 0 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xd800-0xd81f irq 19 at device 26.2 numa-domain 0 on pci0
uhci2: LegSup = 0x2f00
usbus2 numa-domain 0 on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbeda000-0xfbeda3ff irq 18 at device 26.7 numa-domain 0 on pci0
usbus3: EHCI version 1.0
usbus3 numa-domain 0 on ehci0
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xd480-0xd49f irq 23 at device 29.0 numa-domain 0 on pci0
uhci3: LegSup = 0x2f00
usbus4 numa-domain 0 on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xd400-0xd41f irq 19 at device 29.1 numa-domain 0 on pci0
uhci4: LegSup = 0x2f00
usbus5 numa-domain 0 on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xd080-0xd09f irq 18 at device 29.2 numa-domain 0 on pci0
uhci5: LegSup = 0x2f00
usbus6 numa-domain 0 on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbed8000-0xfbed83ff irq 23 at device 29.7 numa-domain 0 on pci0
usbus7: EHCI version 1.0
usbus7 numa-domain 0 on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfaffc000-0xfaffffff,0xfb000000-0xfb7fffff irq 18 at device 1.0 numa-domain 0 on pci6
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel ICH10 AHCI SATA controller> port 0xc480-0xc487,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc81f mem 0xfbed6000-0xfbed67ff irq 19 at device 31.2 numa-domain 0 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
qpi0: <QPI system bus> on motherboard
pcib7: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci7: <PCI bus> on pcib7
pcib8: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci8: <PCI bus> on pcib8
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
usbus0: 12Mbps Full Speed USB v1.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MG04ACA500A FP1A> ATA8-ACS SATA 3.x device
ada0: Serial Number 44E1K00HFK7A
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 4769307MB (1220942646 4096 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA MG04ACA500A FP1A> ATA8-ACS SATA 3.x device
ada1: Serial Number 44E1K00IFK7A
ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 4769307MB (1220942646 4096 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <INTEL SSDSC2MH120A2 PPG4> ATA8-ACS SATA 3.x device
ada2: Serial Number LNEL132300KL120CGN
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 114473MB (234441648 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
uhub0: 2 ports with 2 removable, self powered
ada3: <INTEL SSDSC2MH120A2 PPG4> ATA8-ACS SATA 3.x device
ada3: Serial Number LNEL126400MA120CGN
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
uhub1: 2 ports with 2 removable, self powered
ada3: Command Queueing enabled
uhub2: 2 ports with 2 removable, self powered
ada3: 114473MB (234441648 512 byte sectors)
ada3: quirks=0x1<4K>
SMP: AP CPU #1 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #10 Launched!
cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
cd0: <TEAC DV-28S-V 1.0B> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Timecounter "TSC-low" frequency 1200070288 Hz quality 1000
uhub4: 2 ports with 2 removable, self powered
Trying to mount root from zfs:zroot []...
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7
ugen1.2: <American Megatrends Inc.> at usbus1
ukbd0: <Keyboard Interface> on usbus1
kbd2 at ukbd0
ugen7.2: <PNY Technologies> at usbus7
umass0: <PNY Technologies USB 2.0 FD, class 0/0, rev 2.00/11.00, addr 2> on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:7:0: Attached to scbus7
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <PNY USB 2.0 FD 1100> Removable Direct Access SPC-2 SCSI device
da0: Serial Number AF812H14YD34001373
da0: 40.000MB/s transfers
da0: 15480MB (31703040 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ums0: <Mouse Interface> on usbus1
igb0: link state changed to UP
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
