This post has been replaced by a newer one.
For reference, the previous post on this server is still available.
This system was recently converted to a beadm layout.
For future reference, this is the slocum server, which I use for various jails and services.
$ gpart show
=> 34 5860533101 ada2 GPT (2.7T)
34 94 1 freebsd-boot (47k)
128 4194304 2 freebsd-swap (2.0G)
4194432 5851054080 3 freebsd-zfs (2.7T)
5855248512 5284623 - free - (2.5G)
=> 34 5860533101 ada3 GPT (2.7T)
34 94 1 freebsd-boot (47k)
128 4194304 2 freebsd-swap (2.0G)
4194432 5851054080 3 freebsd-zfs (2.7T)
5855248512 5284623 - free - (2.5G)
=> 34 5860533101 ada4 GPT (2.7T)
34 94 1 freebsd-boot (47k)
128 4194304 2 freebsd-swap (2.0G)
4194432 5851054080 3 freebsd-zfs (2.7T)
5855248512 5284623 - free - (2.5G)
=> 34 5860533101 ada5 GPT (2.7T)
34 94 1 freebsd-boot (47k)
128 4194304 2 freebsd-swap (2.0G)
4194432 5851054080 3 freebsd-zfs (2.7T)
5855248512 5284623 - free - (2.5G)
=> 34 5860533101 ada6 GPT (2.7T)
34 94 1 freebsd-boot (47k)
128 4194304 2 freebsd-swap (2.0G)
4194432 5851054080 3 freebsd-zfs (2.7T)
5855248512 5284623 - free - (2.5G)
=> 34 5860533101 ada7 GPT (2.7T)
34 94 1 freebsd-boot (47k)
128 4194304 2 freebsd-swap (2.0G)
4194432 5851054080 3 freebsd-zfs (2.7T)
5855248512 5284623 - free - (2.5G)
=> 34 62533229 ada0 GPT (29G)
34 62533229 1 freebsd-zfs (29G)
=> 34 62533229 ada1 GPT (29G)
34 62533229 1 freebsd-zfs (29G)
$
# zpool status
pool: ssd
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
ssd ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gpt/ssd0 ONLINE 0 0 0
gpt/ssd1 ONLINE 0 0 0
errors: No known data errors
pool: system
state: ONLINE
scan: scrub in progress since Thu Dec 25 04:16:06 2014
3.34T scanned out of 5.14T at 85.5M/s, 6h8m to go
0 repaired, 64.89% done
config:
NAME STATE READ WRITE CKSUM
system ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gpt/disk0 ONLINE 0 0 0
gpt/disk1 ONLINE 0 0 0
gpt/disk2 ONLINE 0 0 0
gpt/disk3 ONLINE 0 0 0
gpt/disk4 ONLINE 0 0 0
gpt/disk5 ONLINE 0 0 0
errors: No known data errors
$
The filesystems, well, some of them:
$ zfs list NAME USED AVAIL REFER MOUNTPOINT system 4.50T 6.15T 288K / system/backups 655K 6.15T 304K /backups system/backups/knew 288K 6.15T 288K /backups/knew system/bootenv 12.6G 6.15T 1.31M legacy system/bootenv/default 12.6G 6.15T 3.77G / system/bootenv/default/tmp 545M 6.15T 531M /tmp system/bootenv/default/usr 4.95G 6.15T 288K /usr system/bootenv/default/usr/local 2.82G 6.15T 948M /usr/local system/bootenv/default/usr/obj 127M 6.15T 408K /usr/obj system/bootenv/default/usr/src 2.01G 6.15T 818M /usr/src system/bootenv/default/var 44.0M 6.15T 288K /var system/bootenv/default/var/audit 384K 6.15T 320K /var/audit system/bootenv/default/var/empty 288K 6.15T 288K /var/empty system/bootenv/default/var/log 40.6M 6.15T 7.56M /var/log system/bootenv/default/var/tmp 2.41M 6.15T 1.57M /var/tmp system/data 4.48T 6.15T 943K /data system/data/homes 1.75T 6.15T 288K /usr/home system/data/homes/dan 1.75T 6.15T 649G /usr/home/dan system/data/homes/dan/mailjail 6.42G 6.15T 304K /usr/home/dan/mailjail system/data/homes/dan/mailjail/DansMaildir 6.42G 6.15T 5.49G /usr/home/dan/mailjail/DansMaildir system/data/jails 1.86T 6.15T 288K /usr/jails system/data/jails/bacula 266G 6.15T 31.2G /usr/jails/bacula system/data/jails/bacula150 1.28G 6.15T 779M /usr/jails/bacula150 system/data/jails/bacula151 1.28G 6.15T 777M /usr/jails/bacula151 system/data/jails/bacula152 1.28G 6.15T 777M /usr/jails/bacula152 system/data/jails/bacula153 1.28G 6.15T 777M /usr/jails/bacula153 system/data/jails/bacula154 1.28G 6.15T 777M /usr/jails/bacula154 system/data/jails/bacula155 1.28G 6.15T 777M /usr/jails/bacula155 system/data/jails/bacula156 1.28G 6.15T 777M /usr/jails/bacula156 system/data/jails/bacula157 1.28G 6.15T 777M /usr/jails/bacula157 system/data/jails/bacula158 1.28G 6.15T 777M /usr/jails/bacula158 system/data/jails/bacula159 1.28G 6.15T 777M /usr/jails/bacula159 system/data/jails/bacula160 1.28G 6.15T 777M /usr/jails/bacula160 system/data/jails/bacula161 1.28G 6.15T 777M /usr/jails/bacula161 system/data/jails/bacula162 1.18G 6.15T 678M /usr/jails/bacula162 system/data/jails/bacula163 1.28G 6.15T 777M /usr/jails/bacula163 system/data/jails/bacula164 1.28G 6.15T 777M /usr/jails/bacula164 system/data/jails/bacula165 1.28G 6.15T 777M /usr/jails/bacula165 system/data/jails/bacula166 1.28G 6.15T 777M /usr/jails/bacula166 system/data/jails/bacula167 1.28G 6.15T 777M /usr/jails/bacula167 system/data/jails/bacula168 1.28G 6.15T 777M /usr/jails/bacula168 system/data/jails/bacula169 1.28G 6.15T 777M /usr/jails/bacula169 system/data/jails/bacula170 1.28G 6.15T 777M /usr/jails/bacula170 system/data/jails/bacula171 1.28G 6.15T 777M /usr/jails/bacula171 system/data/jails/basejail 7.32G 6.15T 2.51G /usr/jails/basejail system/data/jails/fedex 1.43G 6.15T 698M /usr/jails/fedex system/data/jails/fileserver 174G 6.15T 173G /usr/jails/fileserver system/data/jails/jester 47.0G 6.15T 32.4G /usr/jails/jester system/data/jails/mailjailcopy 2.20G 6.15T 1.05G /usr/jails/mailjailcopy system/data/jails/metrics 84.2G 6.15T 55.2G /usr/jails/metrics system/data/jails/minion 1.41G 6.15T 745M /usr/jails/minion system/data/jails/mydev 15.7G 6.15T 12.3G /usr/jails/mydev system/data/jails/newjail 13.3M 6.15T 11.7M /usr/jails/newjail system/data/jails/sandbox 1.17G 6.15T 1.07G /usr/jails/sandbox system/data/jails/serpico 1.44G 6.15T 729M /usr/jails/serpico system/data/jails/svn 1.08T 6.15T 1.04T /usr/jails/svn system/data/jails/testing 30.6G 6.15T 22.8G /usr/jails/testing system/data/jails/webserver 131G 6.15T 123G /usr/jails/webserver system/data/pgsql 862G 6.15T 480G /usr/local/pgsql system/data/ports 6.96G 6.15T 1.90G /usr/ports system/data/ports/distfiles 3.66G 6.15T 3.66G /usr/ports/distfiles system/data/poudriere 31.1G 6.15T 336K /usr/local/poudriere system/data/poudriere/data 15.5G 6.15T 2.28G /usr/local/poudriere/data system/data/poudriere/data/cache 831M 6.15T 585M /usr/local/poudriere/data/cache system/data/poudriere/data/packages 10.1G 6.15T 4.38G /usr/local/poudriere/data/packages system/data/poudriere/jails 7.00G 6.15T 448K /usr/local/poudriere/jails system/data/poudriere/jails/92amd64 1.64G 6.15T 1.64G /usr/local/poudriere/jails/92amd64 system/data/poudriere/jails/92i386 1.49G 6.15T 1.49G /usr/local/poudriere/jails/92i386 system/data/poudriere/jails/93amd64 1.17G 6.15T 1.13G /usr/local/poudriere/jails/93amd64 system/data/poudriere/jails/93i386 1.11G 6.15T 1.08G /usr/local/poudriere/jails/93i386 system/data/poudriere/jails/bacula164 288K 6.15T 288K /usr/local/poudriere/jails/bacula164 system/data/poudriere/jails/bacula165 288K 6.15T 288K /usr/local/poudriere/jails/bacula165 system/data/poudriere/jails/bacula167 288K 6.15T 288K /usr/local/poudriere/jails/bacula167 system/data/poudriere/jails/bacula168 288K 6.15T 288K /usr/local/poudriere/jails/bacula168 system/data/poudriere/jails/bacula169 288K 6.15T 288K /usr/local/poudriere/jails/bacula169 system/data/poudriere/jails/bsdcan 1.58G 6.15T 1.58G /usr/local/poudriere/jails/bsdcan system/data/poudriere/ports 8.62G 6.15T 320K /usr/local/poudriere/ports system/data/poudriere/ports/default 5.77G 6.15T 1.93G /usr/local/poudriere/ports/default system/data/poudriere/ports/testing 2.85G 6.15T 1.89G /usr/local/poudriere/ports/testing system/data/root 29.1M 6.15T 27.9M /root
And dmesg:
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p5 #0: Mon Nov 3 22:38:58 UTC 2014
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (3300.10-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
TSC: P-state invariant, performance statistics
real memory = 34368126976 (32776 MB)
avail memory = 33130627072 (31595 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfc04000-0xdfc043ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <Marvell 88SE912x AHCI SATA controller> port 0xe090-0xe097,0xe080-0xe083,0xe070-0xe077,0xe060-0xe063,0xe050-0xe05f mem 0xdfb21000-0xdfb217ff irq 16 at device 0.0 on pci1
ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahci0: quirks=0x140<EDGEIS,NOBSYRES>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
atapci0: <Marvell 88SE912x UDMA133 controller> port 0xe040-0xe047,0xe030-0xe033,0xe020-0xe027,0xe010-0xe013,0xe000-0xe00f mem 0xdfb20000-0xdfb2000f irq 17 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0xd000-0xd01f mem 0xdfa00000-0xdfa1ffff,0xdfa20000-0xdfa23fff irq 16 at device 0.0 on pci2
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 00:25:90:a4:cd:d4
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib3
em1: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0xc000-0xc01f mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 18 at device 0.0 on pci3
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: 00:25:90:a4:cd:d5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdfc03000-0xdfc033ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 23 at device 3.0 on pci4
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel Cougar Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xdfc02000-0xdfc027ff irq 19 at device 31.2 on pci0
ahci1: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcafff,0xcb000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SDSSDRC032G 3.0.0> ATA-9 SATA 3.x device
ada0: Serial Number 134106400102
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <SanDisk SDSSDRC032G 3.0.0> ATA-9 SATA 3.x device
ada1: Serial Number 133887400683
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <TOSHIBA DT01ACA300 MX6OABB0> ATA-8 SATA 3.x device
ada2: Serial Number 13Q8U8XYS
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <Hitachi HDS723030BLE640 MX6OAAB0> ATA-8 SATA 3.x device
ada3: Serial Number MSM9215Q0BDB5Y
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
ada4: <Hitachi HDS723030BLE640 MX6OAAB0> ATA-8 SATA 3.x device
ada4: Serial Number MSM9215Q0B2WVX
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad12
ada5 at ahcich5 bus 0 scbus5 target 0 lun 0
ada5: <Hitachi HDS723030BLE640 MX6OAAB0> ATA-8 SATA 3.x device
ada5: Serial Number MSM9215Q0BEESY
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada5: Previously was known as ad14
ada6 at ahcich6 bus 0 scbus6 target 0 lun 0
ada6: <Hitachi HDS723030BLE640 MX6OAAB0> ATA-8 SATA 3.x device
ada6: Serial Number MSM9215Q0BEEUY
ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada6: Previously was known as ad16
ada7 at ahcich7 bus 0 scbus7 target 0 lun 0
ada7: <Hitachi HDS723030BLE640 MX6OAAB0> ATA-8 SATA 3.x device
ada7: Serial Number MSM9215Q0B3EPX
ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada7: Command Queueing enabled
ada7: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada7: Previously was known as ad18
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1650049390 Hz quality 1000
GEOM_MIRROR: Device mirror/swap launched (6/6).
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen0.3: <Winbond Electronics Corp> at usbus0
ugen1.3: <American Power Conversion> at usbus1
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
uhid0: <American Power Conversion Smart-UPS 1500 FWUPS 08.8 ID18, class 0/0, rev 2.00/1.06, addr 3> on usbus1
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhid0: no report descriptor
device_attach: uhid0 attach returned 12
Trying to mount root from zfs:system/rootfs [rw,noatime]...
GEOM_ELI: Device mirror/swap.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
can you show a piec of zfs history. Specially I can not understand, that both system and system/bootenv/default are mounted as ‘/’. That’s make not sense :-)
The zfs list command lists all datasets.
Not all datasets are necessarily mounted.
Compare:
Does that help?