Nagios smartmon stops working after python upgrade

2 Comments / Nagios / By /

This just in:

1
2
3
4
5
6
7
$ /usr/local/bin/sudo /usr/local/libexec/nagios/check_smartmon -d /dev/da0
Traceback (most recent call last):
  File "/usr/local/libexec/nagios/check_smartmon", line 307, in <module>
    (healthStatus, temperature) = parseOutput(healthStatusOutput, temperatureOutput, devtype)
  File "/usr/local/libexec/nagios/check_smartmon", line 216, in parseOutput
    vprint(3, "Health status: %s" % healthStatus)
UnboundLocalError: local variable 'healthStatus' referenced before assignment

But I can’t fix that now. I’m off to the Oscars party.

Website Pin Facebook
Twitter Myspace Friendfeed Technorati del.icio.us Digg Google StumbleUpon Premium Responsive

Related Posts

2 thoughts on “Nagios smartmon stops working after python upgrade”

  2. Dan Langille

    Here is an ata device:

    $ sudo /usr/local/sbin/smartctl -H /dev/ad0 
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

    Here is the same type of device, presented as a scsi device:

    $ sudo /usr/local/sbin/smartctl -H /dev/da0
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART STATUS RETURN: incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

    Here is the patch which ignores that incomplete response line:

    $ diff -ub /usr/local/libexec/nagios/check_smartmon ~/tmp/check_smartmon
--- /usr/local/libexec/nagios/check_smartmon	2014-03-03 16:50:31.633784726 +0000
+++ /usr/home/dan/tmp/check_smartmon	2014-03-03 16:59:06.385990486 +0000
@@ -59,7 +59,7 @@
                         metavar="LEVEL", help="set verbosity level to LEVEL; defaults to 0 (quiet), \
                                         possible values go up to 3")
         parser.add_option("-t", "--type", action="store", dest="devtype", default="ata", metavar="DEVTYPE",
-                        help="type of device (ATA|SCSI)")
+                        help="type of device (ata|scsi)")
         parser.add_option("-w", "--warning-threshold", metavar="TEMP", action="store",
                         type="int", dest="warningThreshold", default=55,
                         help="set temperature warning threshold to given temperature (defaults to 55)")
@@ -162,6 +162,7 @@
                 getNext = 0
                 for line in lines:
                         if getNext:
+                                if line <> "SMART STATUS RETURN: incomplete response, ATA output registers missing":
                                 statusLine = line
                                 break
                         elif line == "=== START OF READ SMART DATA SECTION ===":
@@ -290,11 +291,12 @@
         # check device type, ATA is default
         vprint(2, "Get device type")
         devtype = options.devtype
+        vprint(2, "command line supplied device type is: %s" % devtype)
         if not devtype:
-                devtype = "ATA"
-
         if device_re.search( device ):
                 devtype = "scsi"
+                else:
+                        devtype4= "ata"
 
         vprint(1, "Device type: %s" % devtype)
 
@@ -304,6 +306,7 @@
         if value != 0:
                 exitWithMessage(value, message)
         vprint(2, "Parse smartctl output")
+        
         (healthStatus, temperature) = parseOutput(healthStatusOutput, temperatureOutput, devtype)
         vprint(2, "Generate return information")
         (value, message) = createReturnInfo(healthStatus, temperature,

Leave a Comment