This is the host I’ve been talking about.
Adding this entry to /boot/loader.conf will turn off MFI and enable MRSAS instead.
hw.mfi.mrsas_enable="1"
Then you’ll see expected device names for drives, such as da0 instead of mfisyspd0. This will be done later.
The HBA installed in this host is supported by the FreeBSD mrsas driver. The host has the Invader/Fury 12Gb/s MR controller installed.
There will be more drives. These aren’t necessarily the drives to be used.
This host, when idle with 8 SAS and 2 SATA drives, consumes about 230 watts.
root@mfsbsd:~ # less /var/run/dmesg.boot
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2650L v3 @ 1.80GHz (1800.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 481032142848 (458748 MB)
avail memory = 468404133888 (446704 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
ioapic2 <Version 2.0> irqs 48-71
Launching APs: 1 40 11 26 17 20 35 28 15 10 19 9 47 44 4 12 34 45 29 32 16 37 43 39 5 38 33 7 21 27 22 30 8 41 25 18 24 6 14 3 36 46 2 13 31 42 23
random: entropy device external interface
md0: Preloaded image </mfsroot> 87392256 bytes at 0xffffffff82130590
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e
smbios0: Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 8.2 (no driver attached)
pci0: <dasp, performance counters> at device 9.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pci0: <dasp, performance counters> at device 18.5 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 8.2 (no driver attached)
pci1: <dasp, performance counters> at device 9.2 (no driver attached)
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
pci1: <dasp, performance counters> at device 18.5 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
mfi0: <Invader> port 0x2000-0x20ff mem 0x92500000-0x9250ffff,0x92400000-0x924fffff irq 26 at device 0.0 numa-domain 0 on pci3
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: FW MaxCmds = 928, limiting to 128
mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0
mfi0: 3579 (728438561s/0x0020/info) - Shutdown command received from host
mfi0: 3580 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f47/1028)
mfi0: 3581 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8368
mfi0: 3582 (boot + 11s/0x0008/info) - Battery Present
mfi0: 3583 (boot + 11s/0x0020/info) - Package version 25.5.9.0001
mfi0: 3584 (boot + 11s/0x0020/info) - Board Revision A03
mfi0: 3585 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 3586 (boot + 15s/0x0008/info) - Battery started charging
mfi0: 3587 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: 3588 (boot + 26s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 3589 (boot + 26s/0x0002/info) - Inserted: Encl PD 20
pcib4: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
igb0: <Intel(R) I350 (Copper)> mem 0x92200000-0x922fffff,0x9230c000-0x9230ffff irq 46 at device 0.0 numa-domain 0 on pci5
igb0: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000faa
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 8 RX queues 8 TX queues
igb0: Using MSI-X interrupts with 9 vectors
igb0: Ethernet address: ec:f4:bb:ef:c9:54
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) I350 (Copper)> mem 0x92100000-0x921fffff,0x92308000-0x9230bfff irq 45 at device 0.1 numa-domain 0 on pci5
igb1: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000faa
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 8 RX queues 8 TX queues
igb1: Using MSI-X interrupts with 9 vectors
igb1: Ethernet address: ec:f4:bb:ef:c9:55
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
igb2: <Intel(R) I350 (Copper)> mem 0x92000000-0x920fffff,0x92304000-0x92307fff irq 44 at device 0.2 numa-domain 0 on pci5
igb2: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000faa
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 8 RX queues 8 TX queues
igb2: Using MSI-X interrupts with 9 vectors
igb2: Ethernet address: ec:f4:bb:ef:c9:56
igb2: netmap queues/slots: TX 8/1024, RX 8/1024
igb3: <Intel(R) I350 (Copper)> mem 0x91f00000-0x91ffffff,0x92300000-0x92303fff irq 40 at device 0.3 numa-domain 0 on pci5
igb3: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000faa
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 8 RX queues 8 TX queues
igb3: Using MSI-X interrupts with 9 vectors
igb3: Ethernet address: ec:f4:bb:ef:c9:57
igb3: netmap queues/slots: TX 8/1024, RX 8/1024
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
igb4: <Intel(R) I350 (Copper)> mem 0x91d00000-0x91dfffff,0x91e0c000-0x91e0ffff irq 42 at device 0.0 numa-domain 0 on pci6
igb4: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7
igb4: Using 1024 TX descriptors and 1024 RX descriptors
igb4: Using 8 RX queues 8 TX queues
igb4: Using MSI-X interrupts with 9 vectors
igb4: Ethernet address: a0:36:9f:8d:fa:cc
igb4: netmap queues/slots: TX 8/1024, RX 8/1024
igb5: <Intel(R) I350 (Copper)> mem 0x91c00000-0x91cfffff,0x91e08000-0x91e0bfff irq 45 at device 0.1 numa-domain 0 on pci6
igb5: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7
igb5: Using 1024 TX descriptors and 1024 RX descriptors
igb5: Using 8 RX queues 8 TX queues
igb5: Using MSI-X interrupts with 9 vectors
igb5: Ethernet address: a0:36:9f:8d:fa:cd
igb5: netmap queues/slots: TX 8/1024, RX 8/1024
igb6: <Intel(R) I350 (Copper)> mem 0x91b00000-0x91bfffff,0x91e04000-0x91e07fff irq 44 at device 0.2 numa-domain 0 on pci6
igb6: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7
igb6: Using 1024 TX descriptors and 1024 RX descriptors
igb6: Using 8 RX queues 8 TX queues
igb6: Using MSI-X interrupts with 9 vectors
igb6: Ethernet address: a0:36:9f:8d:fa:ce
igb6: netmap queues/slots: TX 8/1024, RX 8/1024
igb7: <Intel(R) I350 (Copper)> mem 0x91a00000-0x91afffff,0x91e00000-0x91e03fff irq 46 at device 0.3 numa-domain 0 on pci6
igb7: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7
igb7: Using 1024 TX descriptors and 1024 RX descriptors
igb7: Using 8 RX queues 8 TX queues
igb7: Using MSI-X interrupts with 9 vectors
igb7: Ethernet address: a0:36:9f:8d:fa:cf
igb7: netmap queues/slots: TX 8/1024, RX 8/1024
pci2: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x92601000-0x926017ff irq 16 at device 17.4 numa-domain 0 on pci2
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci2: <simple comms> at device 22.0 (no driver attached)
pci2: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92603000-0x926033ff irq 18 at device 26.0 numa-domain 0 on pci2
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib7: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2
pci7: <PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <PCI bus> numa-domain 0 on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
pci10: <PCI bus> numa-domain 0 on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <PCI bus> numa-domain 0 on pcib11
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci11
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92602000-0x926023ff irq 18 at device 29.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x92600000-0x926007ff irq 16 at device 31.2 numa-domain 0 on pci2
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci12: <ACPI PCI bus> numa-domain 1 on pcib12
pcib13: <ACPI PCI-PCI bridge> irq 71 at device 1.0 numa-domain 1 on pci12
pci13: <ACPI PCI bus> numa-domain 1 on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 71 at device 2.0 numa-domain 1 on pci12
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pcib15: <ACPI PCI-PCI bridge> irq 71 at device 3.0 numa-domain 1 on pci12
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI PCI-PCI bridge> irq 71 at device 3.2 numa-domain 1 on pci12
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
ix0: <Intel(R) X520 82599 (Dual SFP+)> port 0x8020-0x803f mem 0xc8100000-0xc81fffff,0xc8204000-0xc8207fff irq 66 at device 0.0 numa-domain 1 on pci16
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 12 RX queues 12 TX queues
ix0: Using MSI-X interrupts with 13 vectors
ix0: allocated for 12 queues
ix0: allocated for 12 rx queues
ix0: Ethernet address: a0:36:9f:83:e1:14
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535
ix0: netmap queues/slots: TX 12/2048, RX 12/2048
ix1: <Intel(R) X520 82599 (Dual SFP+)> port 0x8000-0x801f mem 0xc8000000-0xc80fffff,0xc8200000-0xc8203fff irq 69 at device 0.1 numa-domain 1 on pci16
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 12 RX queues 12 TX queues
ix1: Using MSI-X interrupts with 13 vectors
ix1: allocated for 12 queues
ix1: allocated for 12 rx queues
ix1: Ethernet address: a0:36:9f:83:e1:16
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535
ix1: netmap queues/slots: TX 12/2048, RX 12/2048
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc9000-0xcc7ff,0xcc800-0xd3fff,0xed800-0xf17ff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est31 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est32 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est33 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est34 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est35 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est36 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est37 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est38 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est39 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est40 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est41 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est42 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est43 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est44 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est45 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est46 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16cf00001500
device_attach: est47 attach returned 6
Timecounter "TSC" frequency 1799998557 Hz quality 1000
Timecounters tick every 1.000 msec
mfisyspd0 numa-domain 0 on mfi0
mfisyspd0: 381554MB (781422768 sectors) SYSPD volume (deviceid: 0)
mfisyspd0: SYSPD volume attached
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
mfisyspd1 numa-domain 0 on mfi0
mfisyspd1: 381554MB (781422768 sectors) SYSPD volume (deviceid: 1)
mfisyspd1: SYSPD volume attached
uhub0 numa-domain 0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mfisyspd2 numa-domain 0 on mfi0
mfisyspd2: 381554MB (781422768 sectors) SYSPD volume (deviceid: 2)
mfisyspd2: SYSPD volume attached
uhub1 numa-domain 0 on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mfisyspd3 numa-domain 0 on mfi0
mfisyspd3: 381554MB (781422768 sectors) SYSPD volume (deviceid: 3)
mfisyspd3: SYSPD volume attached
mfisyspd4 numa-domain 0 on mfi0
mfisyspd4: 381554MB (781422768 sectors) SYSPD volume (deviceid: 4)
mfisyspd4: SYSPD volume attached
mfisyspd5 numa-domain 0 on mfi0
mfisyspd5: 381554MB (781422768 sectors) SYSPD volume (deviceid: 5)
mfisyspd5: SYSPD volume attached
mfisyspd6 numa-domain 0 on mfi0
mfisyspd6: 381554MB (781422768 sectors) SYSPD volume (deviceid: 6)
mfisyspd6: SYSPD volume attached
mfisyspd7 numa-domain 0 on mfi0
mfisyspd7: 381554MB (781422768 sectors) SYSPD volume (deviceid: 7)
mfisyspd7: SYSPD volume attached
mfi0: 3590 (boot + 26s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=500056b32a7798fd,0000000000000000
mfi0: 3591 (boot + 26s/0x0002/info) - Inserted: PD 00(e0x20/s0)
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
mfi0: 3592 (boot + 26s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e820028589cd0 at ahcich9 bus 0 scbus10 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM DTA0N D3B0> Removable CD-ROM SCSI device
cd0: Serial Number KZAF81J1012
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
86,0000000000000000
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
mfi0: 3593 (boot + 26s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 3594 (boot + 26s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002858f62,0000000000000000
ses1: pass1,cd0 in 'Slot 05', SATA Slot: scbus10 target 0
mfi0: 3595 (boot + 26s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 3596 (boot + 26s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002858b62,0000000000000000
mfi0: 3597 (boot + 26s/0x0002/info) - Inserted: PD 03(e0x20/s3)
mfi0: 3598 (boot + 26s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002858cc2,0000000000000000
mfi0: 3599 (boot + 26s/0x0002/info) - Inserted: PD 04(e0x20/s4)
mfi0: 3600 (boot + 26s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b32a7798c4,0000000000000000
mfi0: 3601 (boot + 26s/0x0002/info) - Inserted: PD 05(e0x20/s5)
mfi0: 3602 (boot + 26s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b32a7798c5,0000000000000000
mfi0: 3603 (boot + 26s/0x0002/info) - Inserted: PD 06(e0x20/s6)
mfi0: 3604 (boot + 26s/0x0002/info) - Inserted: PD 06(e0x20/s6) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b32a7798c6,0000000000000000
mfi0: 3605 (boot + 26s/0x0002/info) - Inserted: PD 07(e0x20/s7)
mfi0: 3606 (boot + 26s/0x0002/info) - Inserted: PD 07(e0x20/s7) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b32a7798c7,0000000000000000
mfi0: 3607 (boot + 26s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 3608 (728438619s/0x0020/info) - Time established as 01/31/23 0:03:39; (51 seconds since power on)
mfi0: 3609 (728438713s/0x0008/info) - Battery charge complete
mfi0: 3610 (728438713s/0x0008/info) - Battery relearn pending: Battery is under charge
mfi0: 3611 (728438778s/0x0008/info) - Battery relearn started
mfi0: 3612 (728438809s/0x0020/info) - Host driver is loaded and operational
Trying to mount root from ufs:/dev/md0 []...
uhub0: 2 ports with 2 removable, self powered
Dual Console: Video Primary, Serial Secondary
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087 product 0x8002> at usbus1
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x800a> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0
uhub2: 8 ports with 8 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen0.3: <ATEN UC-10KM V1.3.124> at usbus0
ukbd0 numa-domain 0 on uhub3
ukbd0: <HID Keyboard> on usbus0
kbd2 at ukbd0
mfi0: 3613 (728438843s/0x0008/info) - Battery relearn in progress
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Lexar USB Flash Drive (0x05dc:0xa838)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Lexar USB Flash Drive (0x05dc:0xa838)
ugen0.4: <Lexar USB Flash Drive> at usbus0
umass0 numa-domain 0 on uhub3
umass0: <Lexar USB Flash Drive, class 0/0, rev 2.10/11.00, addr 4> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:12:0: Attached to scbus12
ugen0.5: <no manufacturer Gadget USB HUB> at usbus0
uhub4 numa-domain 0 on uhub3
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 5> on usbus0
da0 at umass-sim0 bus 0 scbus12 target 0 lun 0
da0: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-4 SCSI device
da0: Serial Number AAI0R4DRMIPYACI3
da0: 40.000MB/s transfers
da0: 122104MB (250068992 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
GEOM: da0: the secondary GPT header is not in the last LBA.
uhub4: 6 ports with 6 removable, self powered
GEOM: diskid/DISK-AAI0R4DRMIPYACI3: the secondary GPT header is not in the last LBA.
ugen0.6: <Avocent Keyboard/Mouse Function> at usbus0
ukbd1 numa-domain 0 on uhub4
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
random: unblocking device.
lo0: link state changed to UP
igb0: link state changed to UP
Interesting/annoying dmesg output
What is also interesting is this driver isn’t showing me the drive size of the 1920GB Intel SSD when it’s inserted into the drive tray.
For search, that text in the photo above appears below.
The 800GB SAS SSD:
Feb 6 22:13:32 mfsbsd kernel: mfi0: 4088 (729036813s/0x0002/info) - Inserted: PD 07(e0x20/s7) Feb 6 22:13:32 mfsbsd kernel: mfisyspd7 numa-domain 0 on mfi0 Feb 6 22:13:32 mfsbsd kernel: mfisyspd7: 763097MB (1562824368 sectors) SYSPD volume (deviceid: 7) Feb 6 22:13:32 mfsbsd kernel: mfisyspd7: SYSPD volume attached
The 1920GB SATA SSD:
Feb 6 22:13:41 mfsbsd kernel: mfi0: 4089 (729036813s/0x0002/info) - Inserted: PD 07(e0x20/s7) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=58ce38ee200f5b86,0000000000000000 Feb 6 22:14:11 mfsbsd kernel: mfi0: 4090 (729036829s/0x0002/info) - Inserted: PD 0e(e0x20/s14) Feb 6 22:14:11 mfsbsd kernel: mfi0: 4091 (729036829s/0x0002/info) - Inserted: PD 0e(e0x20/s14) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b32a7798ce,0000000000000000 Feb 6 22:14:11 mfsbsd kernel: mfi0: 4092 (729036829s/0x0002/info) - State change on PD 0e(e0x20/s14) from UNCONFIGURED_BAD(1) to UNCONFIGURED_GOOD(0)
with mrsas driver
I used mfsBSD to install FreeBSD 13.1 into one of the spare Dell SSDs I had. The HBA configuration needed to be modified to say: boot from this drive. Once booted, I added this to /boot/loader.conf and did a shutdown -r now.
OK set hw.mfi.mrsas_enable="1" OK boot
When booting finished, this was the dmesg output I obtained:
dvl@r730-01:~ $ cat /var/run/dmesg.boot
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2650L v3 @ 1.80GHz (1800.09-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 481032142848 (458748 MB)
avail memory = 468485804032 (446782 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
ioapic2 <Version 2.0> irqs 48-71
Launching APs: 1 4 10 16 41 36 17 26 9 15 42 13 30 29 32 27 35 47 24 37 45 8 28 19 46 39 31 14 21 34 5 43 40 20 22 2 44 7 6 23 18 33 38 3 25 11 12
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e
smbios0: Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 8.2 (no driver attached)
pci0: <dasp, performance counters> at device 9.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pci0: <dasp, performance counters> at device 18.5 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 8.2 (no driver attached)
pci1: <dasp, performance counters> at device 9.2 (no driver attached)
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
pci1: <dasp, performance counters> at device 18.5 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
mrsas0: <AVAGO Invader SAS Controller> port 0x2000-0x20ff mem 0x92500000-0x9250ffff,0x92400000-0x924fffff irq 26 at device 0.0 numa-domain 0 on pci3
mrsas0: FW now in Ready state
mrsas0: Using MSI-X with 48 number of vectors
mrsas0: FW supports <96> MSIX vector,Online CPU 48 Current MSIX <48>
mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x740,sc->request_alloc_sz 0x1cf8, sc->reply_alloc_sz 0x3a00,sc->io_frames_alloc_sz 0x3a100
mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0x39f sc->chain_frames_alloc_sz: 0xe7c00
mrsas0: Issuing IOC INIT command to FW.
mrsas0: IOC INIT response received from FW.
mrsas0: System PD created target ID: 0x0
mrsas0: System PD created target ID: 0x1
mrsas0: System PD created target ID: 0x2
mrsas0: System PD created target ID: 0x3
mrsas0: System PD created target ID: 0x4
mrsas0: System PD created target ID: 0x5
mrsas0: System PD created target ID: 0x6
mrsas0: System PD created target ID: 0x7
mrsas0: System PD created target ID: 0x8
mrsas0: FW supports: UnevenSpanSupport=1
mrsas0: max_fw_cmds: 927 max_scsi_cmds: 911
mrsas0: MSI-x interrupts setup success
mrsas0: mrsas_ocr_thread
pcib4: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
igb0: <Intel(R) I350 (Copper)> mem 0x92200000-0x922fffff,0x9230c000-0x9230ffff irq 46 at device 0.0 numa-domain 0 on pci5
igb0: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000faa
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 8 RX queues 8 TX queues
igb0: Using MSI-X interrupts with 9 vectors
igb0: Ethernet address: ec:f4:bb:ef:c9:54
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) I350 (Copper)> mem 0x92100000-0x921fffff,0x92308000-0x9230bfff irq 45 at device 0.1 numa-domain 0 on pci5
igb1: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000faa
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 8 RX queues 8 TX queues
igb1: Using MSI-X interrupts with 9 vectors
igb1: Ethernet address: ec:f4:bb:ef:c9:55
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
igb2: <Intel(R) I350 (Copper)> mem 0x92000000-0x920fffff,0x92304000-0x92307fff irq 44 at device 0.2 numa-domain 0 on pci5
igb2: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000faa
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 8 RX queues 8 TX queues
igb2: Using MSI-X interrupts with 9 vectors
igb2: Ethernet address: ec:f4:bb:ef:c9:56
igb2: netmap queues/slots: TX 8/1024, RX 8/1024
igb3: <Intel(R) I350 (Copper)> mem 0x91f00000-0x91ffffff,0x92300000-0x92303fff irq 40 at device 0.3 numa-domain 0 on pci5
igb3: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000faa
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 8 RX queues 8 TX queues
igb3: Using MSI-X interrupts with 9 vectors
igb3: Ethernet address: ec:f4:bb:ef:c9:57
igb3: netmap queues/slots: TX 8/1024, RX 8/1024
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
igb4: <Intel(R) I350 (Copper)> mem 0x91d00000-0x91dfffff,0x91e0c000-0x91e0ffff irq 42 at device 0.0 numa-domain 0 on pci6
igb4: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7
igb4: Using 1024 TX descriptors and 1024 RX descriptors
igb4: Using 8 RX queues 8 TX queues
igb4: Using MSI-X interrupts with 9 vectors
igb4: Ethernet address: a0:36:9f:8d:fa:cc
igb4: netmap queues/slots: TX 8/1024, RX 8/1024
igb5: <Intel(R) I350 (Copper)> mem 0x91c00000-0x91cfffff,0x91e08000-0x91e0bfff irq 45 at device 0.1 numa-domain 0 on pci6
igb5: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7
igb5: Using 1024 TX descriptors and 1024 RX descriptors
igb5: Using 8 RX queues 8 TX queues
igb5: Using MSI-X interrupts with 9 vectors
igb5: Ethernet address: a0:36:9f:8d:fa:cd
igb5: netmap queues/slots: TX 8/1024, RX 8/1024
igb6: <Intel(R) I350 (Copper)> mem 0x91b00000-0x91bfffff,0x91e04000-0x91e07fff irq 44 at device 0.2 numa-domain 0 on pci6
igb6: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7
igb6: Using 1024 TX descriptors and 1024 RX descriptors
igb6: Using 8 RX queues 8 TX queues
igb6: Using MSI-X interrupts with 9 vectors
igb6: Ethernet address: a0:36:9f:8d:fa:ce
igb6: netmap queues/slots: TX 8/1024, RX 8/1024
igb7: <Intel(R) I350 (Copper)> mem 0x91a00000-0x91afffff,0x91e00000-0x91e03fff irq 46 at device 0.3 numa-domain 0 on pci6
igb7: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7
igb7: Using 1024 TX descriptors and 1024 RX descriptors
igb7: Using 8 RX queues 8 TX queues
igb7: Using MSI-X interrupts with 9 vectors
igb7: Ethernet address: a0:36:9f:8d:fa:cf
igb7: netmap queues/slots: TX 8/1024, RX 8/1024
pci2: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x92601000-0x926017ff irq 16 at device 17.4 numa-domain 0 on pci2
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci2: <simple comms> at device 22.0 (no driver attached)
pci2: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92603000-0x926033ff irq 18 at device 26.0 numa-domain 0 on pci2
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib7: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2
pci7: <PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <PCI bus> numa-domain 0 on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
pci10: <PCI bus> numa-domain 0 on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <PCI bus> numa-domain 0 on pcib11
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci11
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92602000-0x926023ff irq 18 at device 29.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x92600000-0x926007ff irq 16 at device 31.2 numa-domain 0 on pci2
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci12: <ACPI PCI bus> numa-domain 1 on pcib12
pcib13: <ACPI PCI-PCI bridge> irq 71 at device 1.0 numa-domain 1 on pci12
pci13: <ACPI PCI bus> numa-domain 1 on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 71 at device 2.0 numa-domain 1 on pci12
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pcib15: <ACPI PCI-PCI bridge> irq 71 at device 3.0 numa-domain 1 on pci12
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
nvme0: <Generic NVMe Device> mem 0xc8300000-0xc8303fff,0xc8304000-0xc83040ff irq 64 at device 0.0 numa-domain 1 on pci15
pcib16: <ACPI PCI-PCI bridge> irq 71 at device 3.2 numa-domain 1 on pci12
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
ix0: <Intel(R) X520 82599 (Dual SFP+)> port 0x8020-0x803f mem 0xc8100000-0xc81fffff,0xc8204000-0xc8207fff irq 66 at device 0.0 numa-domain 1 on pci16
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 12 RX queues 12 TX queues
ix0: Using MSI-X interrupts with 13 vectors
ix0: allocated for 12 queues
ix0: allocated for 12 rx queues
ix0: Ethernet address: a0:36:9f:83:e1:14
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535
ix0: netmap queues/slots: TX 12/2048, RX 12/2048
ix1: <Intel(R) X520 82599 (Dual SFP+)> port 0x8000-0x801f mem 0xc8000000-0xc80fffff,0xc8200000-0xc8203fff irq 69 at device 0.1 numa-domain 1 on pci16
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 12 RX queues 12 TX queues
ix1: Using MSI-X interrupts with 13 vectors
ix1: allocated for 12 queues
ix1: allocated for 12 rx queues
ix1: Ethernet address: a0:36:9f:83:e1:16
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: Option ROM V19-b5-p12 eTrack 0x8000095d PHY FW V65535
ix1: netmap queues/slots: TX 12/2048, RX 12/2048
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc9000-0xcc7ff,0xcc800-0xd3fff,0xed800-0xf17ff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est31 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est32 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est33 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est34 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est35 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est36 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est37 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est38 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est39 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est40 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est41 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est42 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est43 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est44 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est45 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 170600001500
device_attach: est46 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16de00001500
device_attach: est47 attach returned 6
Timecounter "TSC" frequency 1799998439 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
mrsas0: Disestablish mrsas intr hook
uhub0 numa-domain 0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1 numa-domain 0 on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
nvme0: Allocated 200MB host memory buffer
nvd0: <WDC WDS250G2B0C-00PXH0> NVMe namespace
GEOM: nvd0: the primary GPT table is corrupt or invalid.
nvd0: 238475MB (488397168 512 byte sectors)
GEOM: nvd0: using the secondary instead -- recovery strongly advised.
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
GEOM: diskid/DISK-21280E800995: the primary GPT table is corrupt or invalid.
ses1 at ahciem1 bus 0 scbus13 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
GEOM: diskid/DISK-21280E800995: using the secondary instead -- recovery strongly advised.
ses1: (none) in 'Slot 05', SATA Slot: scbus12 target 0
da1 at mrsas0 bus 1 scbus1 target 1 lun 0
da1: <TOSHIBA PX05SMB080Y AS0B> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number Y7P0A02MTEVE
da1: 150.000MB/s transfers
da1: 763097MB (1562824368 512 byte sectors)
da2 at mrsas0 bus 1 scbus1 target 2 lun 0
da2: <TOSHIBA PX05SMB080Y AS0B> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number Y7P0A033TEVE
da2: 150.000MB/s transfers
da2: 763097MB (1562824368 512 byte sectors)
da3 at mrsas0 bus 1 scbus1 target 3 lun 0
da3: <TOSHIBA PX05SMB080Y AS0B> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number Y7P0A022TEVE
da3: 150.000MB/s transfers
da3: 763097MB (1562824368 512 byte sectors)
da0 at mrsas0 bus 1 scbus1 target 0 lun 0
da0: <TOSHIBA PX05SMB080Y AS0B> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number Y7P0A02LTEVE
da0: 150.000MB/s transfers
da0: 763097MB (1562824368 512 byte sectors)
da5 at mrsas0 bus 1 scbus1 target 5 lun 0
da5: <TOSHIBA PX05SMB080Y AS0B> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number Y7P0A02ATEVE
da5: 150.000MB/s transfers
da5: 763097MB (1562824368 512 byte sectors)
da4 at mrsas0 bus 1 scbus1 target 4 lun 0
da4: <TOSHIBA PX05SMB080Y AS0B> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number Y7P0A02QTEVE
da4: 150.000MB/s transfers
da4: 763097MB (1562824368 512 byte sectors)
da6 at mrsas0 bus 1 scbus1 target 6 lun 0
da6: <TOSHIBA PX05SMB080Y AS0B> Fixed Direct Access SPC-4 SCSI device
da6: Serial Number Y7P0A02GTEVE
da6: 150.000MB/s transfers
da6: 763097MB (1562824368 512 byte sectors)
da7 at mrsas0 bus 1 scbus1 target 7 lun 0
da7: <TOSHIBA PX05SMB080Y AS0B> Fixed Direct Access SPC-4 SCSI device
da7: Serial Number Y7P0A02DTEVE
da7: 150.000MB/s transfers
da7: 763097MB (1562824368 512 byte sectors)
cd0 at ahcich9 bus 0 scbus12 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM DTA0N D3B0> Removable CD-ROM SCSI device
cd0: Serial Number KZAF81J1012
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da8 at mrsas0 bus 1 scbus1 target 8 lun 0
da8: <ATA INTEL SSDSC2BX40 DL22> Fixed Direct Access SPC-4 SCSI device
da8: Serial Number BTHC536302CT400VGN
da8: 150.000MB/s transfers
da8: 381554MB (781422768 512 byte sectors)
da8: quirks=0x8<4K>
Trying to mount root from zfs:zrooty/root []...
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.2: <vendor 0x8087 product 0x800a> at usbus0
uhub2 numa-domain 0 on uhub1
uhub2: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x8002> at usbus1
uhub3 numa-domain 0 on uhub0
uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.3: <ATEN UC-10KM V1.3.124> at usbus1
ukbd0 numa-domain 0 on uhub3
ukbd0: <HID Keyboard> on usbus1
kbd2 at ukbd0
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Lexar USB Flash Drive (0x05dc:0xa838)
Root mount waiting for: usbus0
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Lexar USB Flash Drive (0x05dc:0xa838)
ugen0.3: <Lexar USB Flash Drive> at usbus0
umass0 numa-domain 0 on uhub2
umass0: <Lexar USB Flash Drive, class 0/0, rev 2.10/11.00, addr 3> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:14:0: Attached to scbus14
da9 at umass-sim0 bus 0 scbus14 target 0 lun 0
da9: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-4 SCSI device
da9: Serial Number AAI0R4DRMIPYACI3
da9: 40.000MB/s transfers
da9: 122104MB (250068992 512 byte sectors)
da9: quirks=0x2<NO_6_BYTE>
ugen0.4: <no manufacturer Gadget USB HUB> at usbus0
uhub4 numa-domain 0 on uhub2
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus0
ugen0.5: <Avocent Keyboard/Mouse Function> at usbus0
ukbd1 numa-domain 0 on uhub4
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
Root mount waiting for: usbus0
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Avocent Mass Storage Function (0x0624:0x0250)
usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Avocent Mass Storage Function (0x0624:0x0250)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Avocent Mass Storage Function (0x0624:0x0250)
ugen0.6: <Avocent Mass Storage Function> at usbus0
umass1 numa-domain 0 on uhub4
umass1: <SCSI Transparent Interface 0> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0x4101
umass1:15:1: Attached to scbus15
da10 at umass-sim1 bus 1 scbus15 target 0 lun 0
da10: <iDRAC LCLLOG 0329> Removable Direct Access SCSI device
da10: 40.000MB/s transfers
da10: 29MB (59520 512 byte sectors)
da10: quirks=0x2<NO_6_BYTE>
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
lo0: link state changed to UP
igb0: link state changed to UP
ums0 numa-domain 0 on uhub4
ums0: <Mouse> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ums1 numa-domain 0 on uhub4
ums2 numa-domain 0 on uhub3
ums1: <Mouse REL> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ums2: <HID Mouse> on usbus1
ums2: 5 buttons and [XYZ] coordinates ID=0
