Oct 062019
 

This post has been replaced by a new one.

I’ve been given a Dell PowerEdge 720. It contains 8 x 400GB SSDs.

I’ve added in a SAS 9207-8i card, as mentioned yesterday.

FreeBSD is not installed. I booted the system up via mfsBSD and had a look at dmesg output.

root@mfsbsd:~ # cat /var/run/dmesg.boot 
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz (3000.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 412316860416 (393216 MB)
avail memory = 401800478720 (383186 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs
FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads
arc4random: no preloaded entropy cache
ioapic1: Changing APIC ID to 1
ioapic2: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
Launching APs: 29 26 22 16 25 8 7 34 19 9 21 11 36 17 6 15 37 38 31 2 20 14 24 23 10 4 35 30 33 18 1 32 39 12 3 27 13 28 5
Timecounter "TSC-low" frequency 1500029953 Hz quality 1000
random: entropy device external interface
md0: Preloaded image </mfsroot> 69632000 bytes at 0xffffffff8263cd00
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: memory range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: memory range not supported
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xfcc0-0xfcdf mem 0xd8d00000-0xd8dfffff,0xd8ff8000-0xd8ffbfff irq 36 at device 0.0 numa-domain 0 on pci1
ix0: using 2048 tx descriptors and 2048 rx descriptors
ix0: msix_init qsets capped at 16
ix0: pxm cpus: 10 queue msgs: 63 admincnt: 1
ix0: using 10 rx queues 10 tx queues 
ix0: Using MSIX interrupts with 11 vectors
ix0: allocated for 10 queues
ix0: allocated for 10 rx queues
ix0: Ethernet address: ec:f4:bb:c0:bd:a0
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 10/2048, RX 10/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xfce0-0xfcff mem 0xd8e00000-0xd8efffff,0xd8ffc000-0xd8ffffff irq 34 at device 0.1 numa-domain 0 on pci1
ix1: using 2048 tx descriptors and 2048 rx descriptors
ix1: msix_init qsets capped at 16
ix1: pxm cpus: 10 queue msgs: 63 admincnt: 1
ix1: using 10 rx queues 10 tx queues 
ix1: Using MSIX interrupts with 11 vectors
ix1: allocated for 10 queues
ix1: allocated for 10 rx queues
ix1: Ethernet address: ec:f4:bb:c0:bd:a2
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 10/2048, RX 10/2048
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 2.0 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.2 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd
mfi0: <Dell PERC H710P Mini (monolithics)> port 0xec00-0xecff mem 0xd9ffc000-0xd9ffffff,0xd9f80000-0xd9fbffff irq 42 at device 0.0 numa-domain 0 on pci3
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23 
mfi0: FW MaxCmds = 1008, limiting to 128
mfi0: MaxCmd = 1008, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03f0
mfi0: 3347 (623637705s/0x0020/info) - Shutdown command received from host
mfi0: 3348 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 005b/1000/1f34/1028)
mfi0: 3349 (boot + 4s/0x0020/info) - Firmware version 3.131.05-8148
mfi0: 3350 (boot + 5s/0x0008/info) - Battery Present
mfi0: 3351 (boot + 5s/0x0020/info) - Package version 21.3.5-0002
mfi0: 3352 (boot + 5s/0x0020/info) - Board Revision A03
pcib4: mfi0: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 03353 (boot + 6s/0x0008/info) - Battery temperature is normal
mfi0:  on pci0
pci4: 3354 (boot + 6s/0x0008/info) - Current capacity of the battery is above threshold
mfi0: <ACPI PCI bus> numa-domain 0 on pcib4
3355 (boot + 18s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5d81f060f8cf7b00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00
mfi0: 3356 (boot + 20s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 3357 (boot + 20s/0x0002/info) - Inserted: Encl PD 20
mfi0: 3358 (boot + 20s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5d81f060f8cf7b00,0000000000000000
mfi0: 3359 (boot + 20s/0x0002/info) - Inserted: PD 00(e0x20/s0)
pcib5: mfi0: <ACPI PCI-PCI bridge> irq 53 at device 3.2 numa-domain 03360 (boot + 20s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e820027419d2,0000000000000000
 on pci0
pci5: mfi0: 3361 (boot + 20s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: <ACPI PCI bus> numa-domain 0 on pcib5
3362 (boot + 20s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e8200275bf02,0000000000000000
mfi0: 3363 (boot + 20s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 3364 (boot + 20s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002741d72,0000000000000000
mfi0: 3365 (boot + 20s/0x0002/info) - Inserted: PD 03(e0x20/s3)
mfi0: 3366 (boot + 20s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e8200275be06,0000000000000000
mfi0: 3367 (boot + 20s/0x0002/info) - Inserted: PD 04(e0x20/s4)
mfi0: 3368 (boot + 20s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e8200273d5e2,0000000000000000
mfi0: 3369 (boot + 20s/0x0002/info) - Inserted: PD 05(e0x20/s5)
mfi0: 3370 (boot + 20s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002759722,0000000000000000
mfi0: 3371 (boot + 20s/0x0002/info) - Inserted: PD 06(e0x20/s6)
mfi0: 3372 (boot + 20s/0x0002/info) - Inserted: PD 06(e0x20/s6) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e820027598d2,0000000000000000
mfi0: 3373 (boot + 20s/0x0002/info) - Inserted: PD 07(e0x20/s7)
pcib6: mfi0: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 03374 (boot + 20s/0x0002/info) - Inserted: PD 07(e0x20/s7) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5001e82002740fde,0000000000000000
 on pci0
pci6: mfi0: 3375 (boot + 20s/0x0002/info) - Inserted: PD 08(e0x20/s8)
mfi0: <PCI bus> numa-domain 0 on pcib6
3376 (boot + 20s/0x0002/info) - Inserted: PD 08(e0x20/s8) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b37789abe4,0000000000000000
mfi0: 3377 (boot + 20s/0x0002/info) - Inserted: PD 09(e0x20/s9)
mfi0: 3378 (boot + 20s/0x0002/info) - Inserted: PD 09(e0x20/s9) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500056b37789abe5,0000000000000000
mfi0: 3379 (boot + 20s/0x0002/info) - Inserted: PD 21(e0x00/s0)
pci0: mfi0: <simple comms> at device 22.0 (no driver attached)
3380 (boot + 20s/0x0002/info) - Inserted: PD 21(e0x00/s0) Info: enclPd=00, scsiType=7f, portMap=00, sasAddr=500056b37789abfd,0000000000000000
mfi0: 3381 (boot + 63s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 5001e820027419d2, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00
mfi0: 3382 (boot + 63s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5001e8200275bf02, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00
mfi0: 3383 (boot + 63s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 5001e82002741d72, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00
pci0: mfi0: 3384 (boot + 63s/0x0002/info) - Unexpected sense: PD 03(e0x20/s3) Path 5001e8200275be06, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00
mfi0: <simple comms> at device 22.1 (no driver attached)
3385 (boot + 63s/0x0002/info) - Unexpected sense: PD 04(e0x20/s4) Path 5001e8200273d5e2, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00
mfi0: 3386 (boot + 63s/0x0002/info) - Unexpected sense: PD 05(e0x20/s5) Path 5001e82002759722, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00
mfi0: 3387 (boot + 63s/0x0002/info) - Unexpected sense: PD 06(e0x20/s6) Path 5001e820027598d2, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00
mfi0: 3388 (boot + 63s/0x0002/info) - Unexpected sense: PD 07(e0x20/s7) Path 5001e82002740fde, CDB: 4d 00 2f 00 00 00 00 00 0c 00, Sense: 5/24/00
ehci0: mfi0: 3389 (623686699s/0x0020/info) - Time established as 10/06/19 14:18:19; (64 seconds since power on)
mfi0: 3390 (623686911s/0x0020/info) - Host driver is loaded and operational
<Intel Patsburg USB 2.0 controller> mem 0xdc8fd000-0xdc8fd3ff irq 23 at device 26.0 numa-domain 0 on pci0
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xdae80000-0xdaefffff,0xdaff8000-0xdaffbfff irq 19 at device 0.0 numa-domain 0 on pci8
igb0: attach_pre capping queues at 8
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 8
igb0: pxm cpus: 10 queue msgs: 9 admincnt: 1
igb0: using 8 rx queues 8 tx queues 
igb0: Using MSIX interrupts with 9 vectors
igb0: allocated for 8 tx_queues
igb0: allocated for 8 rx_queues
igb0: Ethernet address: ec:f4:bb:c0:bd:a4
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xdaf00000-0xdaf7ffff,0xdaffc000-0xdaffffff irq 18 at device 0.1 numa-domain 0 on pci8
igb1: attach_pre capping queues at 8
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 8
igb1: pxm cpus: 10 queue msgs: 9 admincnt: 1
igb1: using 8 rx queues 8 tx queues 
igb1: Using MSIX interrupts with 9 vectors
igb1: allocated for 8 tx_queues
igb1: allocated for 8 rx_queues
igb1: Ethernet address: ec:f4:bb:c0:bd:a5
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
pci10: <PCI bus> numa-domain 0 on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <PCI bus> numa-domain 0 on pcib11
pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11
pci12: <PCI bus> numa-domain 0 on pcib12
vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdbffc000-0xdbffffff,0xdb000000-0xdb7fffff irq 19 at device 0.0 numa-domain 0 on pci12
vgapci0: Boot video device
pcib13: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci10
pci13: <PCI bus> numa-domain 0 on pcib13
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdc8fe000-0xdc8fe3ff irq 22 at device 29.0 numa-domain 0 on pci0
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib14: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
pci14: <PCI bus> numa-domain 0 on pcib14
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 0xdc8ff000-0xdc8ff7ff irq 20 at device 31.2 numa-domain 0 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI PCI-PCI bridge> irq 85 at device 1.0 numa-domain 1 on pci15
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI PCI-PCI bridge> irq 85 at device 2.0 numa-domain 1 on pci15
pci17: <ACPI PCI bus> numa-domain 1 on pcib17
pcib18: <ACPI PCI-PCI bridge> irq 85 at device 3.0 numa-domain 1 on pci15
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
mps0: <Avago Technologies (LSI) SAS2308> port 0xbc00-0xbcff mem 0xd0ff0000-0xd0ffffff,0xd0f80000-0xd0fbffff irq 80 at device 0.0 numa-domain 1 on pci18
mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
pcib19: <ACPI PCI-PCI bridge> irq 85 at device 3.2 numa-domain 1 on pci15
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pcib20: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci20: <ACPI PCI bus> numa-domain 0 on pcib20
pci20: <dasp, performance counters> at device 14.1 (no driver attached)
pci20: <dasp, performance counters> at device 19.1 (no driver attached)
pci20: <dasp, performance counters> at device 19.5 (no driver attached)
pcib21: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci21: <ACPI PCI bus> numa-domain 1 on pcib21
pci21: <dasp, performance counters> at device 14.1 (no driver attached)
pci21: <dasp, performance counters> at device 19.1 (no driver attached)
pci21: <dasp, performance counters> at device 19.5 (no driver attached)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb800-0xcbfff,0xec000-0xeffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est31 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est32 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est33 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est34 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est35 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est36 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est37 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est38 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 245900002100
device_attach: est39 attach returned 6
Timecounters tick every 1.000 msec
arc4random: no preloaded entropy cache
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
cd0: <TSSTcorp DVD-ROM SN-108DN D150> Removable CD-ROM SCSI device
cd0: Serial Number S1116YCF1001F0
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
random: unblocking device.
arc4random: no preloaded entropy cache
Trying to mount root from ufs:/dev/md0 []...
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
uhub0: arc4random: no preloaded entropy cache
2 ports with 2 removable, self powered
uhub1: arc4random: no preloaded entropy cache
2 ports with 2 removable, self powered
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <ATEN UC-10KM V1.3.124> at usbus0
ukbd0 numa-domain 0 on uhub3
ukbd0: <HID Keyboard> on usbus0
kbd2 at ukbd0
ugen0.4: <no manufacturer Gadget USB HUB> at usbus0
uhub4 numa-domain 0 on uhub3
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 4> on usbus0
ugen1.3: <Lexar USB Flash Drive> at usbus1
umass0 numa-domain 0 on uhub2
umass0: <Lexar USB Flash Drive, class 0/0, rev 2.10/11.00, addr 3> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:8:0: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-4 SCSI device
da0: Serial Number AALPN3HOGJFA0U42
da0: 40.000MB/s transfers
da0: 30526MB (62517248 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
uhub4: 6 ports with 6 removable, self powered
GEOM: da0: the secondary GPT header is not in the last LBA.
GEOM: diskid/DISK-AALPN3HOGJFA0U42: the secondary GPT header is not in the last LBA.
ugen0.5: <Avocent Keyboard/Mouse Function> at usbus0
ukbd1 numa-domain 0 on uhub4
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
lo0: link state changed to UP
ix0: link state changed to UP
igb1: link state changed to UP
root@mfsbsd:~ #
Website Pin Facebook Twitter Myspace Friendfeed Technorati del.icio.us Digg Google StumbleUpon Premium Responsive