This post has been replaced by a new one.
This replaces a previous post.
I’ve been given a Dell PowerEdge 720. It contains 8 x 400GB SSDs and one 80GB SSD for the OS.
I’ve added in a SAS 9207-8i card, as mentioned previously.
[dan@r720-01 ~]$ gpart show ada0
=> 40 156301408 ada0 GPT (75G)
40 1024 1 freebsd-boot (512K)
1064 984 - free - (492K)
2048 4194304 2 freebsd-swap (2.0G)
4196352 152104960 3 freebsd-zfs (73G)
156301312 136 - free - (68K)
[dan@r720-01 ~]$
The zpool:
[dan@r720-01 ~]$ zpool status pool: zroot state: ONLINE scan: scrub repaired 0 in 0 days 00:00:03 with 0 errors on Thu Oct 10 21:37:16 2019 config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 ada0p3 ONLINE 0 0 0 errors: No known data errors [dan@r720-01 ~]$
The filesystems:
[dan@r720-01 ~]$ zfs list NAME USED AVAIL REFER MOUNTPOINT zroot 549M 69.7G 88K /zroot zroot/ROOT 546M 69.7G 88K none zroot/ROOT/default 546M 69.7G 546M / zroot/tmp 104K 69.7G 104K /tmp zroot/usr 400K 69.7G 88K /usr zroot/usr/home 136K 69.7G 136K /usr/home zroot/usr/ports 88K 69.7G 88K /usr/ports zroot/usr/src 88K 69.7G 88K /usr/src zroot/var 624K 69.7G 88K /var zroot/var/audit 88K 69.7G 88K /var/audit zroot/var/crash 88K 69.7G 88K /var/crash zroot/var/log 184K 69.7G 184K /var/log zroot/var/mail 88K 69.7G 88K /var/mail zroot/var/tmp 88K 69.7G 88K /var/tmp [dan@r720-01 ~]$
And dmesg:
root@mfsbsd:~ # cat /var/run/dmesg.boot [dan@r720-01 ~]$ cat /var/run/dmesg.boot ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz (3000.06-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 412316860416 (393216 MB) avail memory = 401865437184 (383248 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads random: unblocking device. ioapic1: Changing APIC ID to 1 ioapic2: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard Launching APs: 29 28 31 19 34 11 3 5 30 38 4 16 37 27 21 26 24 32 25 17 39 6 12 14 33 36 1 10 22 35 20 8 15 7 18 23 2 9 13 Timecounter "TSC-low" frequency 1500032269 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: memory range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: memory range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xfcc0-0xfcdf mem 0xd8d00000-0xd8dfffff,0xd8ff8000-0xd8ffbfff irq 36 at device 0.0 numa-domain 0 on pci1 ix0: using 2048 tx descriptors and 2048 rx descriptors ix0: msix_init qsets capped at 16 ix0: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix0: using 10 rx queues 10 tx queues ix0: Using MSIX interrupts with 11 vectors ix0: allocated for 10 queues ix0: allocated for 10 rx queues ix0: Ethernet address: ec:f4:bb:c0:bd:a0 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 10/2048, RX 10/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xfce0-0xfcff mem 0xd8e00000-0xd8efffff,0xd8ffc000-0xd8ffffff irq 34 at device 0.1 numa-domain 0 on pci1 ix1: using 2048 tx descriptors and 2048 rx descriptors ix1: msix_init qsets capped at 16 ix1: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix1: using 10 rx queues 10 tx queues ix1: Using MSIX interrupts with 11 vectors ix1: allocated for 10 queues ix1: allocated for 10 rx queues ix1: Ethernet address: ec:f4:bb:c0:bd:a2 ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: netmap queues/slots: TX 10/2048, RX 10/2048 pcib2: <ACPI PCI-PCI bridge> irq 53 at device 2.0 numa-domain 0 on pci0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.2 numa-domain 0 on pci0 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 53 at device 3.2 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 pcib6: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 pci6: <PCI bus> numa-domain 0 on pcib6 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdc8fd000-0xdc8fd3ff irq 23 at device 26.0 numa-domain 0 on pci0 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib7: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xdae80000-0xdaefffff,0xdaff8000-0xdaffbfff irq 19 at device 0.0 numa-domain 0 on pci8 igb0: attach_pre capping queues at 8 igb0: using 1024 tx descriptors and 1024 rx descriptors igb0: msix_init qsets capped at 8 igb0: pxm cpus: 10 queue msgs: 9 admincnt: 1 igb0: using 8 rx queues 8 tx queues igb0: Using MSIX interrupts with 9 vectors igb0: allocated for 8 tx_queues igb0: allocated for 8 rx_queues igb0: Ethernet address: ec:f4:bb:c0:bd:a4 igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xdaf00000-0xdaf7ffff,0xdaffc000-0xdaffffff irq 18 at device 0.1 numa-domain 0 on pci8 igb1: attach_pre capping queues at 8 igb1: using 1024 tx descriptors and 1024 rx descriptors igb1: msix_init qsets capped at 8 igb1: pxm cpus: 10 queue msgs: 9 admincnt: 1 igb1: using 8 rx queues 8 tx queues igb1: Using MSIX interrupts with 9 vectors igb1: allocated for 8 tx_queues igb1: allocated for 8 rx_queues igb1: Ethernet address: ec:f4:bb:c0:bd:a5 igb1: netmap queues/slots: TX 8/1024, RX 8/1024 pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 pci10: <PCI bus> numa-domain 0 on pcib10 pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 pci11: <PCI bus> numa-domain 0 on pcib11 pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11 pci12: <PCI bus> numa-domain 0 on pcib12 vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdbffc000-0xdbffffff,0xdb000000-0xdb7fffff irq 19 at device 0.0 numa-domain 0 on pci12 vgapci0: Boot video device pcib13: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci10 pci13: <PCI bus> numa-domain 0 on pcib13 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdc8fe000-0xdc8fe3ff irq 22 at device 29.0 numa-domain 0 on pci0 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib14: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 pci14: <PCI bus> numa-domain 0 on pcib14 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 0xdc8ff000-0xdc8ff7ff irq 20 at device 31.2 numa-domain 0 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci15: <ACPI PCI bus> numa-domain 1 on pcib15 pcib16: <ACPI PCI-PCI bridge> irq 85 at device 1.0 numa-domain 1 on pci15 pci16: <ACPI PCI bus> numa-domain 1 on pcib16 pcib17: <ACPI PCI-PCI bridge> irq 85 at device 2.0 numa-domain 1 on pci15 pci17: <ACPI PCI bus> numa-domain 1 on pcib17 pcib18: <ACPI PCI-PCI bridge> irq 85 at device 3.0 numa-domain 1 on pci15 pci18: <ACPI PCI bus> numa-domain 1 on pcib18 mps0: <Avago Technologies (LSI) SAS2308> port 0xbc00-0xbcff mem 0xd0ff0000-0xd0ffffff,0xd0f80000-0xd0fbffff irq 80 at device 0.0 numa-domain 1 on pci18 mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc> pcib19: <ACPI PCI-PCI bridge> irq 85 at device 3.2 numa-domain 1 on pci15 pci19: <ACPI PCI bus> numa-domain 1 on pcib19 pcib20: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 pci20: <ACPI PCI bus> numa-domain 0 on pcib20 pci20: <dasp, performance counters> at device 14.1 (no driver attached) pci20: <dasp, performance counters> at device 19.1 (no driver attached) pci20: <dasp, performance counters> at device 19.5 (no driver attached) pcib21: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci21: <ACPI PCI bus> numa-domain 1 on pcib21 pci21: <dasp, performance counters> at device 14.1 (no driver attached) pci21: <dasp, performance counters> at device 19.1 (no driver attached) pci21: <dasp, performance counters> at device 19.5 (no driver attached) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb800-0xcbfff,0xec000-0xeffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <Intel EHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 numa-domain 0 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 numa-domain 0 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: <ATEN UC-10KM V1.3.124> at usbus0 ukbd0 numa-domain 0 on uhub2 ukbd0: <HID Keyboard> on usbus0 kbd2 at ukbd0 ugen0.4: <no manufacturer Gadget USB HUB> at usbus0 uhub4 numa-domain 0 on uhub2 uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 4> on usbus0 uhub4: 6 ports with 6 removable, self powered ugen0.5: <Avocent Keyboard/Mouse Function> at usbus0 ukbd1 numa-domain 0 on uhub4 ukbd1: <Keyboard> on usbus0 kbd3 at ukbd1 ugen1.3: <Lexar USB Flash Drive> at usbus1 umass0 numa-domain 0 on uhub3 umass0: <Lexar USB Flash Drive, class 0/0, rev 2.10/11.00, addr 3> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:8:0: Attached to scbus8 ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 ada0: <INTEL SSDSA2CW080G3 4PC10362> ATA8-ACS SATA 2.x device ada0: Serial Number CVPR136108V3080BGN ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 76319MB (156301488 512 byte sectors) ada0: quirks=0x1<4K> da10 at umass-sim0 bus 0 scbus8 target 0 lun 0 da10: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-4 SCSI device da10: Serial Number AANOZQHTLD4M8JSV da10: 40.000MB/s transfers da10: 30526MB (62517248 512 byte sectors) da10: quirks=0x2<NO_6_BYTE> da1 at mps0 bus 0 scbus7 target 9 lun 0 da1: <ATA MZ-5EA1000-0D3 7D3Q> Fixed Direct Access SPC-4 SCSI device da1: Serial Number S0SEN6AD400674 da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 95396MB (195371568 512 byte sectors) da2 at mps0 bus 0 scbus7 target 10 lun 0 da2: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da2: Serial Number 41271040 da2: 600.000MB/s transfers da2: Command Queueing enabled da2: 381554MB (781422768 512 byte sectors) da3 at mps0 bus 0 scbus7 target 11 lun 0 da3: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da3: Serial Number 41163216 da3: 600.000MB/s transfers da3: Command Queueing enabled da3: 381554MB (781422768 512 byte sectors) da4 at mps0 bus 0 scbus7 target 12 lun 0 da4: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da4: Serial Number 41164144 da4: 600.000MB/s transfers da4: Command Queueing enabled da4: 381554MB (781422768 512 byte sectors) da5 at mps0 bus 0 scbus7 target 13 lun 0 da5: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da5: Serial Number 41270788 da5: 600.000MB/s transfers da5: Command Queueing enabled da5: 381554MB (781422768 512 byte sectors) da0 at mps0 bus 0 scbus7 target 8 lun 0 da0: <ATA MZ-5EA1000-0D3 7D3Q> Fixed Direct Access SPC-4 SCSI device da0: Serial Number S0SEN6AD400660 da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 95396MB (195371568 512 byte sectors) da8 at mps0 bus 0 scbus7 target 16 lun 0 da8: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da8: Serial Number 41261264 da8: 600.000MB/s transfers da8: Command Queueing enabled da8: 381554MB (781422768 512 byte sectors) GEOM_MIRROR: Device mirror/swap launched (1/1).da7 at mps0 bus 0 scbus7 target 15 lun 0 da7: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da7: Serial Number 41260832 da7: 600.000MB/s transfers da7: Command Queueing enabled da7: 381554MB (781422768 512 byte sectors) da9 at mps0 bus 0 scbus7 target 17 lun 0 da9: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da9: Serial Number 41160668 da9: 600.000MB/s transfers da9: Command Queueing enabled da9: 381554MB (781422768 512 byte sectors) da6 at mps0 bus 0 scbus7 target 14 lun 0 da6: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da6: Serial Number 41145824 da6: 600.000MB/s transfers da6: Command Queueing enabled da6: 381554MB (781422768 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... GEOM: da0: the secondary GPT header is not in the last LBA. GEOM: da1: the secondary GPT header is not in the last LBA. GEOM: da8: corrupt or invalid GPT detected. GEOM: da8: GPT rejected -- may not be recoverable. GEOM: da9: corrupt or invalid GPT detected. GEOM: da9: GPT rejected -- may not be recoverable. GEOM_ELI: Device mirror/swap.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software lo0: link state changed to UP ix0: link state changed to UP ums0 numa-domain 0 on uhub2 ums0: <HID Mouse> on usbus0 ums0: 5 buttons and [XYZ] coordinates ID=0 ums1 numa-domain 0 on uhub4 ums1: <Mouse> on usbus0 ums1: 3 buttons and [Z] coordinates ID=0 ums2 numa-domain 0 on uhub4 ums2: <Mouse REL> on usbus0 ums2: 3 buttons and [XYZ] coordinates ID=0 [dan@r720-01 ~]$
root@mfsbsd:~ # cat /var/run/dmesg.boot [dan@r720-01 ~]$ cat /var/run/dmesg.boot ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz (3000.06-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 412316860416 (393216 MB) avail memory = 401865437184 (383248 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads random: unblocking device. ioapic1: Changing APIC ID to 1 ioapic2: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard Launching APs: 29 28 31 19 34 11 3 5 30 38 4 16 37 27 21 26 24 32 25 17 39 6 12 14 33 36 1 10 22 35 20 8 15 7 18 23 2 9 13 Timecounter "TSC-low" frequency 1500032269 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: memory range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: memory range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xfcc0-0xfcdf mem 0xd8d00000-0xd8dfffff,0xd8ff8000-0xd8ffbfff irq 36 at device 0.0 numa-domain 0 on pci1 ix0: using 2048 tx descriptors and 2048 rx descriptors ix0: msix_init qsets capped at 16 ix0: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix0: using 10 rx queues 10 tx queues ix0: Using MSIX interrupts with 11 vectors ix0: allocated for 10 queues ix0: allocated for 10 rx queues ix0: Ethernet address: ec:f4:bb:c0:bd:a0 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 10/2048, RX 10/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xfce0-0xfcff mem 0xd8e00000-0xd8efffff,0xd8ffc000-0xd8ffffff irq 34 at device 0.1 numa-domain 0 on pci1 ix1: using 2048 tx descriptors and 2048 rx descriptors ix1: msix_init qsets capped at 16 ix1: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix1: using 10 rx queues 10 tx queues ix1: Using MSIX interrupts with 11 vectors ix1: allocated for 10 queues ix1: allocated for 10 rx queues ix1: Ethernet address: ec:f4:bb:c0:bd:a2 ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: netmap queues/slots: TX 10/2048, RX 10/2048 pcib2: <ACPI PCI-PCI bridge> irq 53 at device 2.0 numa-domain 0 on pci0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.2 numa-domain 0 on pci0 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 53 at device 3.2 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 pcib6: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 pci6: <PCI bus> numa-domain 0 on pcib6 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdc8fd000-0xdc8fd3ff irq 23 at device 26.0 numa-domain 0 on pci0 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib7: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xdae80000-0xdaefffff,0xdaff8000-0xdaffbfff irq 19 at device 0.0 numa-domain 0 on pci8 igb0: attach_pre capping queues at 8 igb0: using 1024 tx descriptors and 1024 rx descriptors igb0: msix_init qsets capped at 8 igb0: pxm cpus: 10 queue msgs: 9 admincnt: 1 igb0: using 8 rx queues 8 tx queues igb0: Using MSIX interrupts with 9 vectors igb0: allocated for 8 tx_queues igb0: allocated for 8 rx_queues igb0: Ethernet address: ec:f4:bb:c0:bd:a4 igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xdaf00000-0xdaf7ffff,0xdaffc000-0xdaffffff irq 18 at device 0.1 numa-domain 0 on pci8 igb1: attach_pre capping queues at 8 igb1: using 1024 tx descriptors and 1024 rx descriptors igb1: msix_init qsets capped at 8 igb1: pxm cpus: 10 queue msgs: 9 admincnt: 1 igb1: using 8 rx queues 8 tx queues igb1: Using MSIX interrupts with 9 vectors igb1: allocated for 8 tx_queues igb1: allocated for 8 rx_queues igb1: Ethernet address: ec:f4:bb:c0:bd:a5 igb1: netmap queues/slots: TX 8/1024, RX 8/1024 pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 pci10: <PCI bus> numa-domain 0 on pcib10 pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 pci11: <PCI bus> numa-domain 0 on pcib11 pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11 pci12: <PCI bus> numa-domain 0 on pcib12 vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdbffc000-0xdbffffff,0xdb000000-0xdb7fffff irq 19 at device 0.0 numa-domain 0 on pci12 vgapci0: Boot video device pcib13: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci10 pci13: <PCI bus> numa-domain 0 on pcib13 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdc8fe000-0xdc8fe3ff irq 22 at device 29.0 numa-domain 0 on pci0 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib14: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 pci14: <PCI bus> numa-domain 0 on pcib14 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 0xdc8ff000-0xdc8ff7ff irq 20 at device 31.2 numa-domain 0 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci15: <ACPI PCI bus> numa-domain 1 on pcib15 pcib16: <ACPI PCI-PCI bridge> irq 85 at device 1.0 numa-domain 1 on pci15 pci16: <ACPI PCI bus> numa-domain 1 on pcib16 pcib17: <ACPI PCI-PCI bridge> irq 85 at device 2.0 numa-domain 1 on pci15 pci17: <ACPI PCI bus> numa-domain 1 on pcib17 pcib18: <ACPI PCI-PCI bridge> irq 85 at device 3.0 numa-domain 1 on pci15 pci18: <ACPI PCI bus> numa-domain 1 on pcib18 mps0: <Avago Technologies (LSI) SAS2308> port 0xbc00-0xbcff mem 0xd0ff0000-0xd0ffffff,0xd0f80000-0xd0fbffff irq 80 at device 0.0 numa-domain 1 on pci18 mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc> pcib19: <ACPI PCI-PCI bridge> irq 85 at device 3.2 numa-domain 1 on pci15 pci19: <ACPI PCI bus> numa-domain 1 on pcib19 pcib20: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 pci20: <ACPI PCI bus> numa-domain 0 on pcib20 pci20: <dasp, performance counters> at device 14.1 (no driver attached) pci20: <dasp, performance counters> at device 19.1 (no driver attached) pci20: <dasp, performance counters> at device 19.5 (no driver attached) pcib21: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci21: <ACPI PCI bus> numa-domain 1 on pcib21 pci21: <dasp, performance counters> at device 14.1 (no driver attached) pci21: <dasp, performance counters> at device 19.1 (no driver attached) pci21: <dasp, performance counters> at device 19.5 (no driver attached) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb800-0xcbfff,0xec000-0xeffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <Intel EHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 numa-domain 0 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 numa-domain 0 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: <ATEN UC-10KM V1.3.124> at usbus0 ukbd0 numa-domain 0 on uhub2 ukbd0: <HID Keyboard> on usbus0 kbd2 at ukbd0 ugen0.4: <no manufacturer Gadget USB HUB> at usbus0 uhub4 numa-domain 0 on uhub2 uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 4> on usbus0 uhub4: 6 ports with 6 removable, self powered ugen0.5: <Avocent Keyboard/Mouse Function> at usbus0 ukbd1 numa-domain 0 on uhub4 ukbd1: <Keyboard> on usbus0 kbd3 at ukbd1 ugen1.3: <Lexar USB Flash Drive> at usbus1 umass0 numa-domain 0 on uhub3 umass0: <Lexar USB Flash Drive, class 0/0, rev 2.10/11.00, addr 3> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:8:0: Attached to scbus8 ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 ada0: <INTEL SSDSA2CW080G3 4PC10362> ATA8-ACS SATA 2.x device ada0: Serial Number CVPR136108V3080BGN ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 76319MB (156301488 512 byte sectors) ada0: quirks=0x1<4K> da10 at umass-sim0 bus 0 scbus8 target 0 lun 0 da10: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-4 SCSI device da10: Serial Number AANOZQHTLD4M8JSV da10: 40.000MB/s transfers da10: 30526MB (62517248 512 byte sectors) da10: quirks=0x2<NO_6_BYTE> da1 at mps0 bus 0 scbus7 target 9 lun 0 da1: <ATA MZ-5EA1000-0D3 7D3Q> Fixed Direct Access SPC-4 SCSI device da1: Serial Number S0SEN6AD400674 da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 95396MB (195371568 512 byte sectors) da2 at mps0 bus 0 scbus7 target 10 lun 0 da2: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da2: Serial Number 41271040 da2: 600.000MB/s transfers da2: Command Queueing enabled da2: 381554MB (781422768 512 byte sectors) da3 at mps0 bus 0 scbus7 target 11 lun 0 da3: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da3: Serial Number 41163216 da3: 600.000MB/s transfers da3: Command Queueing enabled da3: 381554MB (781422768 512 byte sectors) da4 at mps0 bus 0 scbus7 target 12 lun 0 da4: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da4: Serial Number 41164144 da4: 600.000MB/s transfers da4: Command Queueing enabled da4: 381554MB (781422768 512 byte sectors) da5 at mps0 bus 0 scbus7 target 13 lun 0 da5: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da5: Serial Number 41270788 da5: 600.000MB/s transfers da5: Command Queueing enabled da5: 381554MB (781422768 512 byte sectors) da0 at mps0 bus 0 scbus7 target 8 lun 0 da0: <ATA MZ-5EA1000-0D3 7D3Q> Fixed Direct Access SPC-4 SCSI device da0: Serial Number S0SEN6AD400660 da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 95396MB (195371568 512 byte sectors) da8 at mps0 bus 0 scbus7 target 16 lun 0 da8: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da8: Serial Number 41261264 da8: 600.000MB/s transfers da8: Command Queueing enabled da8: 381554MB (781422768 512 byte sectors) GEOM_MIRROR: Device mirror/swap launched (1/1).da7 at mps0 bus 0 scbus7 target 15 lun 0 da7: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da7: Serial Number 41260832 da7: 600.000MB/s transfers da7: Command Queueing enabled da7: 381554MB (781422768 512 byte sectors) da9 at mps0 bus 0 scbus7 target 17 lun 0 da9: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da9: Serial Number 41160668 da9: 600.000MB/s transfers da9: Command Queueing enabled da9: 381554MB (781422768 512 byte sectors) da6 at mps0 bus 0 scbus7 target 14 lun 0 da6: <Pliant LB406M D323> Fixed Direct Access SPC-4 SCSI device da6: Serial Number 41145824 da6: 600.000MB/s transfers da6: Command Queueing enabled da6: 381554MB (781422768 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... GEOM: da0: the secondary GPT header is not in the last LBA. GEOM: da1: the secondary GPT header is not in the last LBA. GEOM: da8: corrupt or invalid GPT detected. GEOM: da8: GPT rejected -- may not be recoverable. GEOM: da9: corrupt or invalid GPT detected. GEOM: da9: GPT rejected -- may not be recoverable. GEOM_ELI: Device mirror/swap.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software lo0: link state changed to UP ix0: link state changed to UP ums0 numa-domain 0 on uhub2 ums0: <HID Mouse> on usbus0 ums0: 5 buttons and [XYZ] coordinates ID=0 ums1 numa-domain 0 on uhub4 ums1: <Mouse> on usbus0 ums1: 3 buttons and [Z] coordinates ID=0 ums2 numa-domain 0 on uhub4 ums2: <Mouse REL> on usbus0 ums2: 3 buttons and [XYZ] coordinates ID=0 [dan@r720-01 ~]$
