Recently, I rearranged the bottom shelf of my rack and rotated the DEC library 90°. Then I placed a new [to me] Overland DLT MinilibraryXpress (model LXM8115). I plugged the cable from my server into the Overland unit and daisy-chained that to the DEC library. The grey cable which leads up and out of the […]
Adding a new tape library Read More »
Right after getting my SCSI cable problems fixed, I was all set to run some Bacula jobs. They immediately started failing: 27-Nov 12:59 bacula-dir JobId 112458: Start Copying JobId 112458, Job=CopyToTape-Diff.2012-11-27_12.58.05_08 27-Nov 12:59 bacula-dir JobId 112458: Using Device “DTL01” 27-Nov 12:59 kraken-sd JobId 112458: Ready to read from volume “DiffAuto-2357” on device “MegaFile” (/storage/compressed/bacula/volumes). 27-Nov
cannot open SCSI device ‘/dev/pass11’ – Permission denied Read More »
Last night I powered on my DEC tape library. I had forgotten to power it on earlier in the week after a maintenance session. Backups to tape were queueing up. Bits needed to be moved. Queues needed to be emptied. I powered on. I ran camcontrol rescan followed by camcontrol devlist. The tape library was
It was the SCSI cable Read More »
In October, I had the great pleasure to visit Warsaw. While there, I gave a talk at EuroBSDCon on how I run my conferences (BSDCan and PGCon). The slides for Running Conferences are now available. The video will be available soon.
Running Conferences Read More »
It seems there is a problem between my home and my server in Austin: $ traceroute supernews.unixathome.org traceroute to supernews.unixathome.org (206.127.23.226), 64 hops max, 40 byte packets 1 L100.PHLAPA-VFTTP-84.verizon-gni.net (98.114.194.1) 6.680 ms 3.669 ms 4.230 ms 2 G0-6-2-2.PHLAPA-LCR-21.verizon-gni.net (130.81.109.140) 3.756 ms 4.053 ms 4.384 ms 3 ae0-0.PHIL-BB-RTR1.verizon-gni.net (130.81.209.178) 3.718 ms 3.787 ms 4.293 ms 4
This is the seventh in a series of articles on my migration to WordPress. In this post, I’ll talk about how I did some cleaning up of the comments after I imported them. Clean? What’s to clean After importing the comments, I noticed, or rather, I was reminded, that Phorum does some things that WordPress
WordPress Migration: Tidying up the comments Read More »
This is the sevent in a series of articles on my migration to WordPress. In this post, I’ll talk about how I updated some of the comments to deal with some tokens left over from the previous system. Tokens? What tokens? When I copied over the comments from my old system, I took the raw
WordPress Migration: Updating the comment signatures Read More »
This is the sixth in a series of articles on my migration to WordPress. In this post, I’ll talk about how I enabled the old URLs. This is important only if you want the ‘old’ content to be found. This is especially important if your website is well established. People will have links to your
WordPress Migration: redirecting old URLs Read More »
I’ve realized that I’m going to need some cables inside this box. 4x SATA Power Splitter Adapter Cable – perhaps 2 x $12 each 3ware CBL-SFF8087OCF-10M 1 Unit of 1M Multi-lane Internal (SFF-8087) Serial ATA Breakout Cable – 2 x $20 each
Miscellaneous cables for the server Read More »
After posting the original plan, I’ve made a few changes, highlighted below in bold Here is what I’m thinking of getting: SUPERMICRO MBD-H8SGL-O ATX Server Motherboard : $224.99 AMD Opteron 6128 Magny-Cours 2.0GHz 8 x 512KB L2 Cache 12MB L3 Cache Socket G34 115W 8-Core Server : $259.99 Kingston 8GB 240-Pin DDR3 SDRAM ECC Registered
Designing a new server, part II Read More »