For future reference. This server formed the backbone of just about everything I did. It hosted about 13 domains. Sadly, it was i386 and would not do for ZFS.
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p2 #0: Mon Sep 15 16:23:12 UTC 2014
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
gcc version 4.2.1 20070831 patched [FreeBSD]
can't re-use a leaf (geom_label)!
can't re-use a leaf (geom_part_gpt)!
module_register: module g_label already exists!
Module g_label failed to register: 17
module_register: module g_part_gpt already exists!
Module g_part_gpt failed to register: 17
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Family = 0xf Model = 0x4 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
TSC: P-state invariant
real memory = 1610612736 (1536 MB)
avail memory = 1537921024 (1466 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL D865GLC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
GEOM_PART: scheme GPT is already registered!
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL D865GLC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ef00000 (3) failed
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 16 at device 2.0 on pci0
agp0: <Intel 82865G (865G GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 16252k stolen memory
vgapci0: Boot video device
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc800-0xc81f irq 16 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xffa7fc00-0xffa7ffff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
dc0: <ADMtek AN983 10/100BaseTX> port 0xb800-0xb8ff mem 0xff8ffc00-0xff8fffff irq 22 at device 1.0 on pci1
miibus0: <MII bus> on dc0
acphy0: <ACXXX 10/100 media interface> PHY 1 on miibus0
acphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:03:6d:1e:59:b0
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xbc00-0xbc3f mem 0xff8fe000-0xff8fefff irq 20 at device 8.0 on pci1
miibus1: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: 00:11:11:f0:92:cf
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f irq 18 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_button0: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounters tick every 1.000 msec
The GEOM class LABEL is already loaded.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <ST3320620AS 3.AAK> ATA-7 SATA 1.x device
ada0: Serial Number 9QF7AF0D
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ata3 bus 0 scbus3 target 0 lun 0
ada1: <ST3320613AS CC2F> ATA-8 SATA 1.x device
ada1: Serial Number 9SZ0AEPZ
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
Timecounter "TSC-low" frequency 1197026320 Hz quality 1000
uhub4: 8 ports with 8 removable, self powered
GEOM_MIRROR: Cancelling unmapped because of ada1.
GEOM_MIRROR: Cancelling unmapped because of ada0.
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
Trying to mount root from ufs:/dev/mirror/gm0s1a [rw]...
The file systems:
$ df -h Filesystem Size Used Avail Capacity Mounted on /dev/mirror/gm0s1a 2G 277M 1.5G 15% / devfs 1.0k 1.0k 0B 100% /dev /dev/mirror/gm0s1d 2G 598k 1.8G 0% /tmp /dev/mirror/gm0s1f 273G 45G 206G 18% /usr /dev/mirror/gm0s1e 9.7G 2.9G 6.1G 32% /var $
The partitions:
$ gpart show
=> 63 625142384 mirror/gm0 MBR (298G)
63 625137282 1 freebsd [active] (298G)
625137345 5102 - free - (2.5M)
=> 0 625137282 mirror/gm0s1 BSD (298G)
0 4194304 1 freebsd-ufs (2.0G)
4194304 4194304 4 freebsd-ufs (2.0G)
8388608 20971520 5 freebsd-ufs (10G)
29360128 4194304 2 freebsd-swap (2.0G)
33554432 591582850 6 freebsd-ufs (282G)
$
