R730

They’re here! 2x (new-to-me 12TB HDD)

5 Comments / DELL, Disks, hardware, R730, smartctl / By /

Yesterday, the drive cages arrived. Today, the 2x (new-to-me 12TB HDD) arrived. They are already mounted in their drive cages and installed. Let’s look at them. This post is similar to Testing two 12TB drives to a Dell R730 on FreeBSD. If you want to know most about the tests, see that. These drives came from serverpartdeals.com. They are used and re-certified. In this post: FreeBSD 13.2-RELEASE-p2 Dell R730 In they go This […]

They’re here! 2x (new-to-me 12TB HDD) Read More »

Identifying jails and data to migrate from old host to new host

Leave a Comment / FreeBSD, hardware, Jails, Open Source, R730 / By /

I’m retiring knew and moving the services over to r730-03. I recently added 2 12TB drives to the latter host. In this post, I’ll start the migration process by identifying what data needs to move, from where, and to where. In this post: knew r730-03 FreeBSD 13.2-RELEASE-p2 The data There are the zpools in question: [15:19 knew dan ~] % zpool list NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT

Identifying jails and data to migrate from old host to new host Read More »

Testing two 12TB drives in a Dell R730 on FreeBSD

Leave a Comment / DELL, Disks, hardware, R730, smartctl / By /

I’m ready to downsize. I’m going to replace knew with r730-03. The former has 20 5TB drives. I don’t need all that space now. I’ll settle for 12TB instead. The two new drives arrived today: [23:39 r730-03 dvl ~] % grep da2 /var/run/dmesg.boot da2 at mrsas0 bus 1 scbus1 target 2 lun 0 da2: Fixed Direct Access SPC-4 SCSI device da2: Serial Number 8CJVT8YE da2: 150.000MB/s transfers da2: 11444224MB (23437770752 512 byte sectors)

Testing two 12TB drives in a Dell R730 on FreeBSD Read More »

Maybe I need another zpool

Leave a Comment / Disks, hardware, R730 / By /

I might need to create another zpool. Or perhaps move a drives/zpool from one host to another. In this post: FreeBSD 13.1 Background I am combining two hosts (slocum and r720-01) into one new host (r730-01). I have been moving jails from those hosts. I have an ansible playbook for creating new entries in /etc/jail.conf.d/. I thought I had the space calculations done right. Now I think I’m wrong.I’m already at 73% on

Maybe I need another zpool Read More »

R730-01

Leave a Comment / DELL, hardware, R730 / By /

This is the host I’ve been talking about. Adding this entry to /boot/loader.conf will turn off MFI and enable MRSAS instead. hw.mfi.mrsas_enable=”1″ Then you’ll see expected device names for drives, such as da0 instead of mfisyspd0. This will be done later. The HBA installed in this host is supported by the FreeBSD mrsas driver. The host has the Invader/Fury 12Gb/s MR controller installed. There will be more drives. These aren’t necessarily the drives

R730-01 Read More »

I have new hardware available – should I upgrade or not?

Leave a Comment / DELL, R730 / By /

I brought home three Dell R730 after saving them from ewaste. Two of them have 8x 3.5″ drive bays. One has 8x 2.5″ drive bays, with with for another 8. This is the one I’m considering for use. I have a fourth R730 in the basement, but I don’t know those specifications, and it already has 16 drive bays. I was thinking of replacing my Dell R720 with one of them, but just

I have new hardware available – should I upgrade or not? Read More »

Scroll to Top