Let’s try the speed test which comes with Bacula’s btape utility. This is Bacula 7.4.0 on FreeBSD 10.2, with a Dell TL4000 LTO-4 tape library.
Using Bacula’s btape speed test on FreeBSD 10.2 and an LTO-4 tape drive Read More »
In this post, I am using FreeBSD 10.2 and Bacula 7.4.0. I am now the proud second-hand owner of a Dell TL4000. The first thing I did was add an air filter. Why? Because I can. I got one made, with custom dimensions, by DEMCiflex. You can see that filter here in this photo. My
Dell TL4000 tape library: running btape and configuring Bacula’s mtx-changer Read More »
I hooked up the Dell TL4000 tape library tonight. I have bacula-sd.conf configured, but I do not have the autochanger configured or tested. I just wanted to run a btape test. A btape test is an essential part of setting up your tape drive with Bacula as it is the initial testing of tape drive
Bacula btape test of Dell TL4000 LTO-4 tape drives Read More »
This output is a Bacula btape test of the library mentioned in this post. $ sudo btape -c /usr/local/etc/bacula/bacula-sd.conf /dev/nsa0 Tape block granularity is 1024 bytes. btape: butil.c:290 Using device: “/dev/nsa0” for writing. btape: btape.c:477 open device “DTL03” (/dev/nsa0): OK *test === Write, rewind, and re-read test === I’m going to write 10000 records and
Bacula btape test of Compaq Storage Works MSL5026 Library Read More »
The time has come for me to move from shelving to racks. My first thought was to list the various racks over the years. Look below for old photos and links to the posts I lifted them from. Why a rack? In the past, I have always built my own servers, computers, from parts. I
Moving from shelves to racks Read More »
Last night, I managed to install new (but used) SAS cables for my Dell TL4000 on the tape01 server. I managed to get bacula-sd running, but I was unable to communicate with it from bacula-dir, via bconsole on my laptop. Eventually, I ran bacula-sd from the command line in the foreground and with debugging and
Using a Dell TL4000 with Bacula’s bacula-sd on FreeBSD with ZFS Read More »
I am fortunate to receive donations. In the early days, it was a 386 desktop. Later, it was SCSI drives. Recently, it’s been tape libraries. A Bacula user in Europe donated an Overland DLT-8000 tape library in 2012 and paid for shipping to me. At BSDCan 2013, I was fortunate to pick up an Compaq
Using the Compaq Storage Works MSL5026 Library Read More »
This article was written some months go, but only published today. I recently acquired a new tape auto-changer / library. I have already run some simple tests on the library, and all seems well. I already have an existing Bacula installation and my plan is to add this new auto-changer into that. The Devices The
Adding a tape library to Bacula Read More »
*run A job name must be specified. The defined Job resources are: 1: BackupCatalog 2: RestoreFiles 3: MigrateDiskToTape 4: CopyMegaFileToTape 5: laptop 6: laptop-vpn 7: laptop-wifi-5.3 8: laptop-verify 9: laptop-websites 10: laptop-xp 11: wocker 12: bast basic 13: bast home 14: dbclone basic 15: dbclone home 16: polo basic 17: polo 18: kraken basic 19:
Why not use the tape that’s there? Read More »