Following up on last weeks comparison of 10 disks vs 8 disks on raidz2, it was suggested by Marie Helene that I try more HDD on the m/b. I’m here to report just that. I’ve put 5 HDD on the SUPERMICRO MBD-X8SIL-O Micro ATX Server m/b and five on the LSI SATA/SAS 9211-8i 6Gb/s. Here are the pg_restore times: 18m28.511s 18m32.359s 18m30.077s An average of 18m 30s. This is the slowest of all […]
raidz2: 10 disks – half and half Read More »
Yesterday, I mentioned I wanted to compare raidz2 when using 10 disks versus using 8 disks. Along the way, I noticed that my ZFS-setup script needed a change to cope with mixed devices. Once I got past that hurdle, I started adding packages and setting up the system for some very simple tests. The test My test of preference is loading a database, and then dumping it. Each pg_restore was done into a
raidz2: 10 disks vs 8 disks Read More »
THe last system I set up with ZFS, I used a script. Today, when trying a system with different device types, I encountered a limitation of that script. I need to fix it. In the above script, NUM takes on the value of what digits appear in the string of I. Given that DISKS contains both ada0 and da0, two disks will get the same value for $I. That’s a problem. I need
Problem with disk numbering in my ZFS creation script Read More »
The traditional thoughts on ZFS are to have arrays which are a power-of-2 when it comes to number of disks. That means 2, 4, 8, etc. But for raidz1, that would be 3, 5, 9. For my choice of raidz2, it would be 4, 6, and 10. In the system I’m building up now, I have an 8-port LSI SATA/SAS 9211-8i 6Gb/s card. I can add two more HDD by attaching them to
ZFS: raidz2 with 8 or 10 disks? Read More »
My gateway is dying. My file server is getting full. Over the past few weeks, I’ve been dealing with aging infrastructure. My development server started acting up and was showing signs of age. This aging desktop box contained 80GB HDD, which means it’s probably 6 or 7 years old. That’s getting on in age. It’s been replaced by a much gruntier server. After completeing that work, I have to consider my gateway, which
Gateway getting old; File server getting full Read More »
I was trying to recompile sysutils/bacula-client on a FreeBSD 8.4 jail when I encountered some perplexing link errors. It took me a while to figure it out, but with the help of some IRC conversation, we figured it out. I started off by deleting the old (quite old) port: bacula-client-5.0.3 Then I recompiled: cd /usr/ports/sysutils/bacula-client && make install clean The errors in question are: I tried recompiling a few ports, such as gettext.
Compiling bacula client gives link errors Read More »
I recently upgraded a jail server from FreeBSD 8.2 to FreeBSD 8.4. This stopped various jails from starting their own instances of PostgreSQL. The messages in the logs were: Jul 9 14:48:48 building postgres[40785]: [2-1] FATAL: could not create shared memory segment: Function not implemented Jul 9 14:48:48 building postgres[40785]: [2-2] DETAIL: Failed system call was shmget(key=5432001, size=12099584, 03600). In my jails, I was seeing: $ sysctl security.jail.sysvipc_allowed security.jail.sysvipc_allowed: 0 Looking at my
FATAL: could not create shared memory segment: Function not implemented Read More »
I recently upgraded a jail server from FreeBSD 8.2 to 8.4, and part of that process involved recompiling all of the applications. Along the way, nrpe on one jail stopped working. Nagios was reporting: CHECK_NRPE: Socket timeout after 10 seconds. Trying from the command line gave: $ /usr/local/libexec/nagios/check_nrpe2 -H -H dbclone.example.org -c check_pgsql -t 1 CHECK_NRPE: Socket timeout after 1 seconds. Other jails worked just fine: $ /usr/local/libexec/nagios/check_nrpe2 -H building.unixathome.org -c check_pgsql -t
nrpe: Could not read request from client, bailing out… Read More »
When you first get your APC 7900, you won’t be able to talk to it. Here is how I configured mine. Assign an IP adress to the APC 7900 To assign an IP address to an APC 7900: # arp -s 10.0.0.128 00:C0:B7:78:8A:7E # ping -s 113 10.0.0.128 PING 10.0.0.128 (10.0.0.128): 113 data bytes 121 bytes from 10.0.0.128: icmp_seq=0 ttl=255 time=91.755 ms 121 bytes from 10.0.0.128: icmp_seq=1 ttl=255 time=4.165 ms 121 bytes from
Configuring and assigning an IP address to an APC 7900 Read More »
The other day, I disconnected the ethernet cable from my gateway to reroute the cable. Then, perhaps coincidentally, I started seeing these entries: Jul 2 15:19:57 bast kernel: fxp0: discard frame w/o leading ethernet header (len 4294967294 pkt len 4294967294) Jul 2 15:28:01 bast kernel: fxp0: discard frame w/o leading ethernet header (len 4294967294 pkt len 4294967294) Jul 2 15:28:02 bast kernel: fxp0: discard frame w/o leading ethernet header (len 4294967294 pkt len
discard frame w/o leading ethernet header Read More »