Author name: Dan Langille

Benchmarking the TOSHIBA DT01ACA300 – ZFS

Leave a Comment / File Systems, ZFS / By /

This is a repeat of a benchmark I did yesterday. The drive is a TOSHIBA DT01ACA300 3TB HDD. This is a 7200 RPM SATA III drive. Tests were run with FreeBSD 9.1 in the hardware listed below. Tonight, we’re going to do the partitions slightly differently, and try ZFS. The hardware We are testing on the following hardware: motherboard – SUPERMICRO MBD-H8SGL-O ATX Server Motherboard (Supermicro link): $224.99 CPU – AMD Opteron 6128 […]

Benchmarking the TOSHIBA DT01ACA300 – ZFS Read More »

Do you have a Seagate ST2000DM001?

4 Comments / Disks / By /

Do you have Seagate ST2000DM001? This 2TB drives seems OK at straight dd output, but seems absolutely terrible at random output. If you have one, and do not mind this destructive test (IT WILL DESTROY ANY DATA ON THAT DRIVE), please let me know the results. The reason I ask is the very slow results we’re getting from a tool designed to test the throughput of an HDD based on writing data at

Do you have a Seagate ST2000DM001? Read More »

How I upgrade my WordPress installations

Leave a Comment / Open Source, WordPress / By /

I have three blogs run on WordPress. Each runs on its own installation of WordPress. Why? Because all the single-install solutions I’ve seen were not very attractive. Convince me otherwise. Following the official instructions, I drew up this set of instructions which work for me. Hopefully, they work for you too. But I’m sure it’d going to be cryptic at first. My WordPress is installed in the directory wordpress.installed. The webserver looks for

How I upgrade my WordPress installations Read More »

zfsroot guides – which one to use?

2 Comments / File Systems, ZFS / By /

I started looking around for guides for creating a zfsroot. Here is what I’ve glanced at so far, along with some of my comments. I plan to create an 8 drive array, running raidz2. FreeBSD wiki page – seems OK ZFS-only booting by Ollivier Robert – based on 8.0, but I need to read it through again OPTI­MIZED FOR 4K-SECTOR DRIVES – interesting, but not set up the way I want my system

zfsroot guides – which one to use? Read More »

Benchmarking the Seagate ST2000DM001 – slower hardware

Leave a Comment / Disks, hardware / By /

In the previous benchmark of the Seagate ST2000DM001 2TB HDD, I used a AMD Opteron 6128 Magny-Cours 2.0GHz (see the URL for complete details of the system). Today, I’m using a different system. The hardware We are testing on the following hardware: motherboard – SUPERMICRO MBD-X9SCL+-F Micro ATX Server Motherboard LGA 1155 Intel C202 DDR3 1333 (manufacturer page) – $179.99 CPU – Intel Xeon E3-1230 V2 Ivy Bridge 3.3GHz (3.7GHz Turbo) 4 x

Benchmarking the Seagate ST2000DM001 – slower hardware Read More »

Benchmarking the Samsung SSD 840 PRO Series DXM03B0Q – ZFS

3 Comments / Disks, File Systems, hardware, ZFS / By /

Following on from yesterday’s benchmark, I’m adding in some ZFS tests. All hardware is the same. Of note: $ zdb | grep ashift ashift: 9 $ sudo diskinfo -v ada0 Password: ada0 512 # sectorsize 128035676160 # mediasize in bytes (119G) 250069680 # mediasize in sectors 0 # stripesize 0 # stripeoffset 248085 # Cylinders according to firmware. 16 # Heads according to firmware. 63 # Sectors according to firmware. S12PNEACB31368P # Disk

Benchmarking the Samsung SSD 840 PRO Series DXM03B0Q – ZFS Read More »

Benchmarking the Samsung SSD 840 PRO Series DXM03B0Q

7 Comments / Benchmarks, Disks, hardware / By /

Today, I’ll be benchmarking a Samsung SSD 840 PRO Series DXM03B0Q. I’ve had this for a couple of weeks, but I’ve not been ready for it until today. This drive will not be detected by FreeBSD 9.1-STABLE and before. A relatively recent commit fixed a problem with When I booted with the SSD installed, I saw this in demsg: (aprobe3:ahcich5:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00

Benchmarking the Samsung SSD 840 PRO Series DXM03B0Q Read More »

Benchmarking the TOSHIBA DT01ACA300

3 Comments / Benchmarks, Disks, File Systems, hardware / By /

Tonight I received a TOSHIBA DT01ACA300 3TB HDD. This is a 7200 RPM SATA III drive. Tests were run with FreeBSD 9.1 in the hardware listed below. The hardware We are testing on the following hardware: motherboard – SUPERMICRO MBD-H8SGL-O ATX Server Motherboard (Supermicro link): $224.99 CPU – AMD Opteron 6128 Magny-Cours 2.0GHz 8 x 512KB L2 Cache 12MB L3 Cache Socket G34 115W 8-Core Server : $284.99 RAM – Kingston 8GB 240-Pin

Benchmarking the TOSHIBA DT01ACA300 Read More »

Benchmarking the Seagate ST2000DM001

2 Comments / Benchmarks, Disks, File Systems, hardware / By /

I have a Seagate ST2000DM001 sitting in a server. I’ve run some simple tests. Results are below. Tests were run with FreeBSD 9.1 in the hardware listed below. The hardware We are testing on the following hardware: motherboard – SUPERMICRO MBD-H8SGL-O ATX Server Motherboard (Supermicro link): $224.99 CPU – AMD Opteron 6128 Magny-Cours 2.0GHz 8 x 512KB L2 Cache 12MB L3 Cache Socket G34 115W 8-Core Server : $284.99 RAM – Kingston 8GB

Benchmarking the Seagate ST2000DM001 Read More »

Scroll to Top