Network monitoring

Did VictoriaLogs miss any logs during the reboot?

Leave a Comment / FreeBSD, Monitoring, Network monitoring, Open Source, syslog-ng, Victoria Logs / By /

Yesterday, I modified r730-01 by Running pkgbasify on FreeBSD 15.0 – as a consequence, my log collecting jail was offline. Did it miss any logs? Let’s find out. In this post: FreeBSD 15.0 syslog-ng-4.11.0_2 (sending logs from FreshPorts production) victoria-logs-1.50.0_2 (receiving logs in the logs jail The period in question Looking at /var/log/messages, I see: With syslogd now stopped, there are no further logs until: NOTE: I had not set the logs jail […]

Did VictoriaLogs miss any logs during the reboot? Read More »

network connectivity issues – in the #homelab

Leave a Comment / Network monitoring, Networks / By /

Yesterday a big storm came through. Many downed trees (photos here). The power went off at about 0500 and came back again at about 1009, off again at 1309, back at 1319. It was then stable for the rest of the day. Overnight, I saw monitoring alerts which initially made me think there was another power cut. uptime showed that was not the case. I also didn’t see any timeout messages meaning the

network connectivity issues – in the #homelab Read More »

Optimizing UPS power use when the power goes out

Leave a Comment / Eaton, Network monitoring, nut, UPS / By /

This post is mostly for myself. I’m just putting my Sunday morning thoughts down for later review and consideration. When Selecting replacements batteries for my Eaton 5PX UPS (5PX2200RT & 5PXEBM48RT), I began to think about: when the power goes off, why can’t I keep using my laptop? Usually, I still have an Internet connection: the ISP isn’t going offline. Why not turn off the two servers in the basement, and anything else

Optimizing UPS power use when the power goes out Read More »

Nagios 3: moving from nrpe 3 to nrpe 4 – what needs changing?

Leave a Comment / FreeBSD, Nagios, Network monitoring / By /

Yesterday, I noticed this message in one of the “daily security run output” emails which FreeBSD host can send out. I’ve used net-mgmt/nrpe3 for several years. It checks remote hosts and runs any number of predetermined commands and returns the results. It’s stable, highly configurable, and just keeps running. I had a look at the replacement (net-mgmt/nrpe) and decided to build and install it. First, it went onto my poudriere package bulding host

Nagios 3: moving from nrpe 3 to nrpe 4 – what needs changing? Read More »

Monitoring FreeBSD jails from the host

Leave a Comment / FreeBSD, Jails, Nagios, Network monitoring, nrpe / By /

It was May 2021 when I tweeted about monitoring FreeBSD jails which had jail IP addresses only in the 127.0.0.0/8 range. Yesterday, nearly 6 months later, I did the first test of this. This came up because I’m getting a new FreshPorts node ready. I’ve created a file in the jail to be run from the host. That script runs in the jail but it initiated by a process on the host. In

Monitoring FreeBSD jails from the host Read More »

Listen queue overflow

Leave a Comment / Network monitoring, Networks / By /

The R720 is showing a message like this from time to time: Jan 1 07:42:20 r720-01 kernel: sonewconn: pcb 0xfffff835e785d5b8: Listen queue overflow: 8 already in queue awaiting acceptance (1 occurrences) Jan 1 08:02:21 r720-01 syslogd: last message repeated 1 times Jan 1 08:27:22 r720-01 kernel: sonewconn: pcb 0xfffff835e785d5b8: Listen queue overflow: 8 already in queue awaiting acceptance (2 occurrences) Jan 1 16:07:04 r720-01 kernel: sonewconn: pcb 0xfffff835e785d5b8: Listen queue overflow: 8 already

Listen queue overflow Read More »

Munin

Leave a Comment / Network monitoring / By /

This is an old post I wrote, but never published, back in 2010. I’ve started using Munin for some statistical monitoring. Using the hddtemp_smartctl plugin, I was getting some permission errors. After printing the output of the command, I noticed these in the logs: 2010/03/11-18:30:05 [60845] [ERROR] Command /usr/local/sbin/smartctl -A /dev/ad8 on drive ad8 failed: 256. The plugin needs to have read permission on all monitored devices. smartctl 5.39 2009-12-09 r2995 [FreeBSD 8.0-STABLE

Munin Read More »

Monitoring backups via Nagios and a shell script

Leave a Comment / Backups, Nagios, Network monitoring, nrpe, Open Source / By /

Backups are useless without restores. I’ve written a few posts about Nagios, my current monitoring tool of choice. Included with Nagios are a number of plugins and you can even write your own plugins. In this post, I’ll show you a shell script I wrote to make sure my backup files turn up where they should, when they should. In my case, these files are database backups, but the idea behind the script

Monitoring backups via Nagios and a shell script Read More »

Wireless Diagnostics on OSX – check your wifi

Leave a Comment / Network monitoring, OSX / By /

I wanted to know how many wireless access points (WAPs) were using what channels near my place. I googled and found a reference to the built-in OSX tool, Wireless Diagnostics. But to be fair, the app is hidden. To access the app, hold the Command key while clicking on the WIFI icon. This will change what usually appears: Now click on Wireless Diagnostics. The following should appear. This is the boring part. Not

Wireless Diagnostics on OSX – check your wifi Read More »

Monitoring temperature

2 Comments / Network monitoring / By /

Earlier today, I was reminded of a old series of tweets regarding temperature. That led me to this to a FreeBSD Forums post which showed me this interesting bit of information. I draw your attention to the two hw.acpi.thermal values near the top. Those may well represent the ambient room temperature, more or less. A little shell script. Some graphing. Bob’s yer uncle. # kldload coretemp # sysctl -a | grep -i “temp”.

Monitoring temperature Read More »

Scroll to Top